CELLFLEX® TRANSMISSION LINE COAXIAL CABLE

CELLFLEX® is a range of low-attenuation transmission line cables for high performance applications within the telecommunications sector. installations and others.

These cables are ideally suited for the demands of professional radio and TV stations, WLAN, 3M GSM networks, WLAN and extra-long transmission line runs. Available in all major sizes of 1/2 inch, 5/8 inch, 7/8in, 1-1/4in, 1-5/8in and 2-1/4in, ask for a quote, if you need unlisted type.

Constructed of a closed-cell polyethylene dielectric and welded-seam solid copper conductors, these cables have passed rigorous testing and meet exacting performance specifications.

They are available in standard polyethylene or flame-retardant polyethylene jacket materials, and with premium VSWR levels in several telecommunication bands.

Our opinion: If you plan on using long runs of cable (25 meters and more) or plan on using more than 1KW of power, we strongly suggest that you seriously consider this cable. The savings in greater output power and high power handling justify the extra cost. There is a reason why many professional radio and TV stations use Cellflex cable.

Technical specifications for 1/2 inch Cellflex:
Structure
- Impedance: 50 ohms
- Inner conductor: Copper wire 4.9mm
- Dielectric: Low Loss foam polyethylene 11.6mm
- Outer conductor: Coffugated copper tube 13.7mm
- Jacket: Polyethylene, black 16mm

Mechanical properties:
- Weight: 0.35Kg/m
- Minimum bending radius, single bending: 70mm
- Minimum bending radius, repeated bending: 200mm
- Max tensile force: 1470N
- Recommended temp. range: -40C to +60C
- Recommended temp. range during installation: -25C to +60C

Electrical properties:
- Charasteristic impedance: 50 +-1 ohms
- Velocity factor: 88%
- Capacity: 76pF/m
- Max operating frequency: 3000MHz
- Cut-off frequency: 10200 MHz
- Peak power rating: 25.6KW
- Peak RF voltage rating: 1.6KV
- DC-resistance inner conductor: 0.97ohm/Km
- DC-resistance outer conductor: 1.9ohm/Km

Attenuation:
- 10MHz: 0.67 db/100m
- 30MHz: 1.17 db/100m
- 88MHz: 2.02 db/100m
- 100MHz: 2.16 db/100m
- 108MHz: 2.25 db/100m
- 200MHz: 3.08 db/100m
- 900MHz: 6.8 db/100m
- 1500MHz: 9.0 db/100m
- 2300MHz: 11.4 db/100m
- 3000MHz: 13.2 db/100m

Power handling (1/2inch Cellflex):
- 30MHz: 7.27KW
- 88MHz: 4.2KW
- 108MHz: 3.94KW
- 150MHz: 3.2KW
- 450MHz: 1.8KW
- 1250MHz: 1.05KW

For better power handling ability or less loss please use 7/8 inch or thicker CellFlex models. Please note that this does not make financial or practical sense in 90% of radio station installations as 1/2" is more than sufficient.


Technical specifications for 7/8 inch Cellflex:
Structure
- Impedance: 50 ohms
- Inner conductor: Copper wire 9.42mm
- Dielectric: Low Loss foam polyethylene 21.1mm
- Outer conductor: Corrugated copper tube 24.89m
- Jacket: Polyethylene, black 27.48mm

Mechanical properties:
- Weight: 0.432Kg/m
- Minimum bending radius, single bending: 90mm
- Minimum bending radius, repeated bending: 125mm
- Bending moment: 13Nm
- Recommended temp. range: -40C to +60C
- Recommended temp. range during installation: -25C to +60C

Electrical properties:
- Charasteristic impedance: 50 +-1 ohms
- Velocity factor: 88%
- Capacity: 76pF/m
- Max operating frequency: 4900MHz
- Peak power rating: 83KW
- Peak RF voltage rating: 2.85KV
- Jacket Spark, volt RMS: 8KV
- DC-resistance inner conductor: 2.82ohm/Km
- DC-resistance outer conductor: 1.04ohm/Km

Attenuation:
- 10MHz: 0.379 db/100m
- 30MHz: 0.662 db/100m
- 88MHz: 1.15 db/100m
- 100MHz: 1.23 db/100m
- 108MHz: 1.28 db/100m
- 200MHz: 1.76 db/100m
- 900MHz: 3.94 db/100m
- 1500MHz: 5.24 db/100m
- 2400MHz: 6.84 db/100m
- 3000MHz: 7.79 db/100m

Power handling (7/8inch Cellflex):
- 30MHz: 15.3KW
- 88MHz: 8.8KW
- 108MHz: 7.91KW
- 150MHz: 6.67KW
- 450MHz: 3.74KW
- 1250MHz: 2.14KW