Hi, im trying to update the RDS on a Cybermax + Series.
Im running a cable from the SO232 serial to USB into a windows 10 laptop.
Trouble is when i open the programme on the CybermaxFM v5.5 it says wrong baud rate.
Ive installed the drivers and the updated win10 driver and set it to Com 5 and a baud rate of 9600. but still having same issue.
Any Ideas what is wrong?
baud rate
Moderators: Nina, pcs, 5r, Boris
Don't use auto detect. Just set it and see if you can write to it.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128