Hi all,
I've just bought the 19" enclosure to fit my MAX PRO 3000+ into and I have found that the ribbon cable for the LCD module is too short! I am a bit surprised at this, is there any easy way for me to extend it?
Also my audio port does not fit in so I guess I will have to de-solder it..
19" Enclosure
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
Hi, our box requires quite long flat cable, if you purchase box and exciter at the same time we make sure they match.
You can make your own cable easily, flat cable and connectors can be purchased at any electronic parts shop. Just make sure they are turned exactly as in our cable (you have a sample, the supplied cable).
When mounting the exciter into the rack you also need to remove audio connector at the front as it is no longer needed.
You can make your own cable easily, flat cable and connectors can be purchased at any electronic parts shop. Just make sure they are turned exactly as in our cable (you have a sample, the supplied cable).
When mounting the exciter into the rack you also need to remove audio connector at the front as it is no longer needed.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128