PCS LPF-6000 FM LOW PASS FILTER with DIGIAMP

Manuals and drivers for all products, erratas, problem report and solutions and related topics...

Moderators: Nina, pcs, 5r, Boris

Post Reply
bmw4797
New registered user
New registered user
Posts: 4
Joined: Thu Jan 12, 2012 9:53 am

PCS LPF-6000 FM LOW PASS FILTER with DIGIAMP

Post by bmw4797 »

http://www.pcs-electronics.com/lpf6000- ... ml?image=0



Hi. Ich möchte einen umfassenden Plan für LPF600. Das Kabel (Universal 14-poligen Flachbandkabel DIGIAMP (40cm) mit 3 Anschlüssen), um zum MAX PRO 5040 verbinden. leiten.
verfügt über eine 50 V-Netzteil, was es ist;

Hi. I would like a comprehensive plan for LPF600. The cable (Universal 14-pin DIGIAMP flat cable (40cm) with 3 connectors) to connect to the MAX PRO 5040. direct.
has a +50 V PSU what it is;

Thank
Image
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

You can connect the same voltage that is also supplying the power amplifier. This way you can monitor this voltage, it is shown on the LCD and you can even set alarm which is triggered if voltage is too high for example.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply