It says to adjust the trimmer to get the desired out on the CyberMax+ transmitter, the only adjustment I have/want to deal with is the blue potentiometer on the 3000 EN card and it doesn`t seem to make any difference what I do to it my output volume it none adjustable. The LED limit indicators on the board are weird also, only one light on the left channel lights up no matter how much input signal I run to the transmitter, I have even purposly over modulated the signal and only that one light will faintly light up. I have other questions but will start from here and work my way up until I get everything figured out.
Thanks to anyone whom can help me.
Audio Output Adjustment on the CyberMax+
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
You should be looking at the trimmer on the FM exciter card, that's the one at the bottom on the left. You can turn that one to increase/decrease audio level.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128