PCS 3000LPF

Discussions regarding our FM transmitters, DX reports, antenna designs, problems...

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
User avatar
stylzmovement
Compulsive poster:)
Compulsive poster:)
Posts: 142
Joined: Sat Oct 11, 2003 8:59 pm

PCS 3000LPF

Post by stylzmovement »

Can You talk about the procedure for setting up the swr protection on this board, on my board i have the unit connected to the MaxPro 3000 plus . what is a good point in terms of temperature should be the shutdown point?



http://www.pcs-electronics.com/lpf3000- ... -1123.html
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

Well, you have SWR and PWR signals, that's pretty self explanatory.

The swr protection pulls down the swr protection line as swr becomes
higher. This can be used to light a LED diode, pull down bias in amp,
pull down some power disable point in transmitter etc.

It is designed for someone with a bit of experience.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply