RF two or 3 ways Splitters

Discussions regarding our FM transmitters, DX reports, antenna designs, problems...

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
User avatar
stylzmovement
Compulsive poster:)
Compulsive poster:)
Posts: 142
Joined: Sat Oct 11, 2003 8:59 pm

RF two or 3 ways Splitters

Post by stylzmovement »

i will like to build an amplifier using a drive exciter ( max pro 3 ) into a 2 or 3 ways splitter to power two or three amp modules, do you have these spliters on the site?

will i need any additional devices?
User avatar
pcs
Site master
Site master
Posts: 3132
Joined: Fri Jan 18, 2002 1:00 am
Location: Radio Land
Contact:

Post by pcs »

Yep, you missed this one I think:

http://www.pcs-electronics.com/transmit ... 1_102.html

Typically it is done in x2 mode, meaning you'll need 2 or 4 pallets.

You need equal pallets (same type) for this as the full amp with filters
differs too much from another one, even if of the same type.
Phase shift in LC filter makes it impossible to combine/splits signals across
the band.

Here is a complete kit for you:
http://www.pcs-electronics.com/1500w-am ... -1237.html
It lacks 1500W filter only.

If you get stuck ask before burning expensive pallets :)
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Post Reply