Is there a possibillity to switch the RDS encoder on/off when it's still in my MPX line?
As a DX station i sometimes have to switch off RDS, a relay between the MPX line is not a option.
Is there maybe a pin on the atmel processor which i can control? or maybe on the PLL?
Other question is where i can find the protocol to control the RDS max, i want to show temperature and windspeed and some other things on my RDS info.
Grtzz Yagi
RDS MAX 3.0 possible to switch on/off
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
Hi there!
Regarding protocol, we are about to release RDSMAX4000+
and we plan to describe protocol in the manual to ease third-party
development. The good thing is that the protocol is pretty much
identical to the RDSMAX30 protocol and you will be able to use
that information. You can also email me directly for any help
or even a sample program.
Basically you can send each of the PS fields simply over to the
target like this:
<STARTBYTE>PSxx<MIDDLEBYTE>PSXXTEXT<ENDBYTE>
<STARTBYTE>: 8-bit byte, value 0
<STARTBYTE>: 8-bit byte, value 1
<STARTBYTE>: 8-bit byte, value 2
PSxx: PS00 to PS87, use the one you want to write to
PSXXTEXT: 8-character ascii string
Don't forget to set the corresponding delay for the PS field.
<STARTBYTE>PDxx<MIDDLEBYTE>DELAY<ENDBYTE>
<STARTBYTE>: 8-bit byte, value 0
<STARTBYTE>: 8-bit byte, value 1
<STARTBYTE>: 8-bit byte, value 2
PDxx: PD00 to PD87, use the one you want to set
DELAY: Ascii text delay value, "0" to "9", zero sets the PS field off
Regarding turning RDS carrier on and off, an easy way to do this would
be to place a switch across RDS level trimmer (the two adjacent pins).
You gave me an idea though for future models, might be useful to others
as well.
Regarding protocol, we are about to release RDSMAX4000+
and we plan to describe protocol in the manual to ease third-party
development. The good thing is that the protocol is pretty much
identical to the RDSMAX30 protocol and you will be able to use
that information. You can also email me directly for any help
or even a sample program.
Basically you can send each of the PS fields simply over to the
target like this:
<STARTBYTE>PSxx<MIDDLEBYTE>PSXXTEXT<ENDBYTE>
<STARTBYTE>: 8-bit byte, value 0
<STARTBYTE>: 8-bit byte, value 1
<STARTBYTE>: 8-bit byte, value 2
PSxx: PS00 to PS87, use the one you want to write to
PSXXTEXT: 8-character ascii string
Don't forget to set the corresponding delay for the PS field.
<STARTBYTE>PDxx<MIDDLEBYTE>DELAY<ENDBYTE>
<STARTBYTE>: 8-bit byte, value 0
<STARTBYTE>: 8-bit byte, value 1
<STARTBYTE>: 8-bit byte, value 2
PDxx: PD00 to PD87, use the one you want to set
DELAY: Ascii text delay value, "0" to "9", zero sets the PS field off
Regarding turning RDS carrier on and off, an easy way to do this would
be to place a switch across RDS level trimmer (the two adjacent pins).
You gave me an idea though for future models, might be useful to others
as well.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Thank you for the quick answer, i also thought about cutting of the RDS level but i did not know that connecting it to earth is no problem (i will use a small omron relais as i don't won't long wires carrying my RDS signal)
About this protocol you wrote three times <startbyte> but if i understand correctly it's something like this:
To change only PS01 in Hallo i have to do this:
<byte>PS01<byte>PS01Hallo<byte>
and set delay 5sec
<byte>PD01<byte>05<byte>
When i'm finished building the encoder in a cabinet i will send you an email for more protocol data information (like baudrate), controlling the RDS max will be done by a microprocessor.
What is the function off the moreturn potentiometer on the pcb? and how can i adjust it correctly? (measuring points)
Grtzz Yagi
About this protocol you wrote three times <startbyte> but if i understand correctly it's something like this:
To change only PS01 in Hallo i have to do this:
<byte>PS01<byte>PS01Hallo<byte>
and set delay 5sec
<byte>PD01<byte>05<byte>
When i'm finished building the encoder in a cabinet i will send you an email for more protocol data information (like baudrate), controlling the RDS max will be done by a microprocessor.
What is the function off the moreturn potentiometer on the pcb? and how can i adjust it correctly? (measuring points)
Grtzz Yagi
Pretty much, yeah. I'll have sample app ready soon for RDSMAX4000+,
you should study it, it'll explain it all very plainly.
Marko
you should study it, it'll explain it all very plainly.
Marko
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
PS, I took notice of your suggestion about turning RDS off, it is now a standard
part of RDSMAX4000+, you just need to click a checkbox and send settings
to encoder.
part of RDSMAX4000+, you just need to click a checkbox and send settings
to encoder.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
rdsmax4000+ sample app
As promised here is the VB sample program for RDS MAX 4000+
http://www.pcs-electronics.com/softwar ... pleApp.rar
Use winrar to unpack into a directory of your preference.
Feel free to ask questions here.
http://www.pcs-electronics.com/softwar ... pleApp.rar
Use winrar to unpack into a directory of your preference.
Feel free to ask questions here.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128