PCS Electronics PCS Electronics - home page PCS Electronics  
RegisterSearchFAQAM & FM Radio transmitters shop UsergroupsLog in
New product: RF Output Board with SWR/PWR pickup

 
Reply to topic    PCS-Electronics Forum Index » FM transmitters View previous topic
View next topic
New product: RF Output Board with SWR/PWR pickup
Author Message
pcs
Site master
Site master


Joined: 18 Jan 2002
Posts: 3063
Location: Radio Land

Post New product: RF Output Board with SWR/PWR pickup Reply with quote
http://www.pcs-electronics.com/output-board-with-swrpwr-pickup-p-1116.html



RF output board for N or SO239 connector with SWR/PWR directional coupler

A simple solution that could make your life so much easier. If you ever wanted to mount a N or SO239 connector to your enclosure and connect coaxial cable to it in a clean and effective way without adding parasitic inductance and making it all look like a mess, you probably noticed that this isn't so easy to do. We do have a simple solution, however. This small PCB screws tightly and directly to the N or SO239 connector (see pictures) and enables a clean, electrically excellent and also good looking contact. To top it off, it also contains a small stripline directional coupler. Three-pin solder header provides ground and two voltages, one for SWR and the other for POWER. You can now measure this voltage to determine your output POWER or SWR. It is also possible to use this board to simply build SWR protection.

Coaxial cable can be easily soldered to the terminals as shown on the photos. We recommend teflon based coaxial cable for such interconnection wiring since teflon isolation does not melt when soldered or heated due to high power level. Boards with installed 15cm of RG142 teflon cable are also available. This cable is also prepared for soldering on its free end, making installation extremely simple.

Technical specifications
- Size: 62mmx29mm
- Power handling: 0-500W (not tested above 500W, probably handles 1KW)
- Frequency range: 0-150MHz
- Connectors supported: N and SO239
- Includes: PCB and all components, connector and screws not included

Our opinion: Its cheap and eliminates so much hassle its really a no-brainer.

_________________
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Wed May 02, 2007 3:29 pm View user's profile Send private message Visit poster's website
Display posts from previous:    
Reply to topic    PCS-Electronics Forum Index » FM transmitters All times are GMT + 1 Hour
Page 1 of 1

 
Jump to: 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group