SE4 DSP settings

All posts related to SE1, SE2 and SE3 and our future stereo encoders go here!

Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators

Post Reply
nickFF
Regular poster
Regular poster
Posts: 28
Joined: Mon Jun 06, 2005 10:44 pm
Location: EU, France

SE4 DSP settings

Post by nickFF »

Hi everyone
Just one question: according to the online doc, SE4 DSP threshold can be set at -12dB for example. But mine can only jump to -18dB. So, the compression works a little bit too early... Is there any way to modify this?
Regards
User avatar
Grogster
Regular poster
Regular poster
Posts: 22
Joined: Mon Mar 25, 2002 1:00 am
Location: NEW ZEALAND

Post by Grogster »

You have to kinda play with the three buttons(UP, DOWN, MENU) to get the settings you want. They seem to be a bit touchy, and you can actually effect several changes with only one "Press" of the button. Try again a couple of times, and you should be able to get it down to -12dB.
:)

I think that the code in the uCPU needs to have a "De-bounce" routine, or if it already has one, the de-bounce delay needs to be increased.

Perhaps Marko will read this post and comment...
Post Reply