PCS Electronics PCS Electronics - home page PCS Electronics  
RegisterSearchFAQAM & FM Radio transmitters shop UsergroupsLog in
MPX OUTPUT *****

 
Reply to topic    PCS-Electronics Forum Index » Stereo encoders View previous topic
View next topic
MPX OUTPUT *****
Author Message
stylzmovement
Compulsive poster:)
Compulsive poster:)


Joined: 11 Oct 2003
Posts: 142

us.gif

Post MPX OUTPUT ***** Reply with quote
What type of cable do you recommended to be used from the SE4 DSP MPX output to the input on the Max Pro IV Exciter?
Should I use 50 ohms coax? Or regular audio wires?
Mon Feb 27, 2006 10:48 am View user's profile Send private message
pcs
Site master
Site master


Joined: 18 Jan 2002
Posts: 3063
Location: Radio Land

Post Reply with quote
Audio coax is fine. 50 ohm coax is fine, too, but not practical since its very rigid.

I like the tiny RG174 50 ohm coax with teflon insulation since the insulation does not
melt when heated. The only problem here is that its hard to remove insulation since
teflon is very tough to cut.

The problem with the cheaper audio coax is often that the hot braid melts
the insulation and shorts to the inner conductor so be carefull when soldering.

_________________
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Mon Feb 27, 2006 11:32 am View user's profile Send private message Visit poster's website
stylzmovement
Compulsive poster:)
Compulsive poster:)


Joined: 11 Oct 2003
Posts: 142

us.gif

Post Reply with quote
a good quality audio coax is very expensive , do you get a better performance with this ?
Mon Feb 27, 2006 10:23 pm View user's profile Send private message
pcs
Site master
Site master


Joined: 18 Jan 2002
Posts: 3063
Location: Radio Land

Post Reply with quote
Nope, it is a waste of money.

_________________
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Mon Feb 27, 2006 10:38 pm View user's profile Send private message Visit poster's website
Display posts from previous:    
Reply to topic    PCS-Electronics Forum Index » Stereo encoders All times are GMT + 1 Hour
Page 1 of 1

 
Jump to: 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group