PCS Electronics PCS Electronics - home page PCS Electronics  
RegisterSearchFAQAM & FM Radio transmitters shop UsergroupsLog in
Testing LDMOS transistors with DMM multimeter

 
Reply to topic    PCS-Electronics Forum Index » FM transmitters View previous topic
View next topic
Testing LDMOS transistors with DMM multimeter
Author Message
pcs
Site master
Site master


Joined: 18 Jan 2002
Posts: 3056
Location: Radio Land

Post Testing LDMOS transistors with DMM multimeter Reply with quote
This is a very usefull text:

http://www.embedded.com/print/4219409

All too often today, one or more of the following field-testing issues are encountered:

Issue #1
Technicians literally grabbing an RF power transistor and testing it “free form” with a battery powered multimeter (using either the ohmmeter or diode setting).

Problems Caused
It is impossible to properly test leakage current with a battery powered multimeter. The output voltage and the meter’s impedance are completely unknown. This will certainly lead to invalid and/or unreliable readings. Remember, the DUT must be tested under the correct voltages, and the correct conditions, to guarantee reliable and repeatable results. Using a multimeter, no details regarding the DUT’s actual leakage current level can actually be measured or recorded in any meaningful way. A battery-powered multimeter can only reliably be used to test whether a clearly already defective DUT is either “open” or “shorted.”

Issue #3
Static discharge is applied to the DUT (improper device handling).

Problems Caused
Static discharge can and likely will ruin (forever) an otherwise good device.

Issue #4
Improper grounding/shielding/isolation methods are employed with the DUT.

Problems Caused
Testing with improper shielding, grounding, and isolation will lead to erroneous and invalid measurements; and it may also damage the part.

Improper Testing Lead to These Unfortunate Consequences:
- Both “good” and “bad” devices are being damaged unnecessarily, and this makes further analysis impossible.
- Some devices that are actually within specification are being thrown away or being rejected/returned because of erroneous test results.

Conclusion: DO NOT TEST RF LDMOS WITH DMM multimeter!

_________________
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Thu Aug 17, 2017 11:31 am View user's profile Send private message Visit poster's website
Display posts from previous:    
Reply to topic    PCS-Electronics Forum Index » FM transmitters All times are GMT + 1 Hour
Page 1 of 1

 
Jump to: 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group