hi -
im running a new maxpro 2015 and its in a metal enclosure but getting pretty warm - im just wondering if you can tell me where the fan connects - it says in the manual it has pads for this - i cannot see them on the board..
thanks
max pro 2015
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
Hi,
that part of the manual was copy-pasted from max pro 3000 which has dedicated pads.
The 2015 does not, but it is not really a problem, all you need to do is connect the fan to +15V (power supply).
A small 40x40 12V fan will do, make it blow across the final.
Larger fan is ok as well. A larger fan does not need to blow that strong so it can be connected to on-board 7809 making it silent.
Otherwise everything ok?
that part of the manual was copy-pasted from max pro 3000 which has dedicated pads.
The 2015 does not, but it is not really a problem, all you need to do is connect the fan to +15V (power supply).
A small 40x40 12V fan will do, make it blow across the final.
Larger fan is ok as well. A larger fan does not need to blow that strong so it can be connected to on-board 7809 making it silent.
Otherwise everything ok?
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128