More static wider carrier?
Moderators: Sir Nigel, Nina, pcs, 5r, phpBB2 - Administrators
-
- Regular poster
- Posts: 22
- Joined: Thu Jan 30, 2014 7:26 am
More static wider carrier?
So I've been using your MAXPRO 3000+ for a while and have found it to perform decently. I recently acquired a veronica/*Ads not allowed* transmitter. When using the veronica with the same amplifier at the same power, I get about half the static in the signal (the range is the same). I decided to hook up both transmitters to a spectrum analyzer and found that the MAXPRO has a carrier twice the width. Does this have anything to do with the increased static when using your transmitter? Can anything be done to improve the spectral quality? Do your higher end transmitters fix this problem? Could it be the stereo coder? I'd like to use your transmitter because of the higher output power and features.
-
- Regular poster
- Posts: 22
- Joined: Thu Jan 30, 2014 7:26 am
The noise of the stereo encoder is usually the source of the problem. And yes, setting MPX sensitivity too high will have a similar effect.
Best regards,
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
Marko - PCS Electronics
--------------------------------------------------------
Turn your PC into a FM radio station!
http://www.pcs-electronics.com
fax +386 4 2316 128
-
- Regular poster
- Posts: 22
- Joined: Thu Jan 30, 2014 7:26 am