Light aluminum antenna masts/towers, lattice construction

341,99$1.213,54$

In Stock
SKU: 3-6m antenna mast Category:
992,90$
1.213,54$
341,99$

Prices shown are without VAT (paid only in EU)

Description

Sectionalized aluminum antenna masts/towers, lattice construction

MAL3000, MAL4500 and MAL 6000 (upgraded to 6m) are solid, lightweight aluminum construction antenna towers with the possibility of climbing by a qualified installer. Guy-wires are not necessary which makes the mast require little space and has a beneficial effect on aesthetics. Guy wires are recommended for heavier antennas and higher 6m tower. The mast stands on the tilting base fixed on a ground with three anchors, cemented into the ground. The masts are suitable for lightweight antennas such as WLAN, STL or wire antennas and with guy wires also heavier FM or TV broadcasting antennas. It is better to be conservative when it comes to safety!

Single section for building a mast/tower is 1.5m-high lattice construction made of aluminum. The design with triangular cross-section (in a vertical projection – see the bottom view picture) with three sides of 250 mm is exceptionally strong, but light and easy to handle, even with one hand. The support elements are aluminum tubes with an outside diameter of 35 mm and 1.5 mm thick walls. The sections can be joined together to form free-standing masts/towers up to 6-meter high.

 

Height of the mast: 3m, 4.5m or 6m
Number of sections: 2-3-4
Wall thickness: 1.5 mm
Material: Aluminum
Construction: Framework structure of triangular cross-section : 250 x 250 x 250 mm
Supporting pillars: Aluminum tube Ø 35 mm
Main features: • The lack of guy-wires (we recommend using them!)
• Tilting base application enables lowering the mast
• Possibility of climbing the assembled mast by the person + antenna weighing up to 100 kgs with winds up to 5 m/s (at your own responsibility, exercise extreme caution!)
• The possibility of transport in the trunk of a passenger car since sections are only 1,5m
• The dimensions of the product after packing enable to send it by courier across Europe easily
Weight: • 15.15 kg – Mast (3 sections, 20Kg 4 sections)
• 3.01 kg – Mast base
• 1.6 kg – Anchor for concrete

 

What’s included in shipment:

2-segment 3m antenna tower:
– 2 lattice tower segments, each 1.5m long
– Tower base, footing for mast
– 3 anchors with bolts for concrete foundation
– Lightning rod clamp, this is accessory needed for lightning protection

3-segment 4.5m antenna tower:
– 3 lattice tower segments, each 1.5m long
– Tower base, footing for mast
– 3 anchors with bolts for concrete foundation
– Lightning rod clamp, this is accessory needed for lightning protection

4-segment 6m antenna tower:
– Everything included with 3-segment version + one extra segment for a total of 6m

WARNING: Setting up antenna tower can be very dangerous and can result in death and property damage, if you are going to use extra segment and heavier antennas definitely use guy wires! Building higher than 6 meters is not a good idea! Be vary of any overhead electrical/telephone wires when raising the tower!

 

Additional information

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.