|
Narrow band-pass cavity filters
This is a line of single, double or triple coaxial cavity filters, from low power to 10KW. These filters are constructed using high Q quarter wave lines with variable coupling. Simply install these between transmitter and antenna to assure maximum signal without any spurious or harmonics. Also helps remove spurious mixing products when used in multi-transmitter installations. Fabricated from aluminum, cavities are silver plated copper with teflon insulators.
Technical specifications (For all models):
- Frequency Band: 87.5-108 Mhz
- Impedance: 50 Ohm
- V.S.W.R.: < 1.15 : 1
Technical specifications for PCS/101-PCS/102:
- Form factor: 19" 3H rack
- Connectors: N
- Insertion Loss: 0,4 - 0.9 dB
- Power handling: 100W(101) - 200W(102)
- B.W. (-3db): 150 -300 Khz
- Temperature: 10 - 40°
Technical specifications for PCS/1001, double cavity:
- Form factor: Assembly, see photo
- Connectors: N
- B.W. (-3db): 800 khz - 1.5 Mhz
- Insertion Loss: <0,4 dB
- Power handling: 800W
- Dimensions: 200x220x1000 mm
- Weight: 10Kg
Technical specifications for PCS/1001-H, double cavity:
- Form factor: Assembly, see photo
- Connectors: 7/16
- B.W. (-3db): 800 khz - 1.5 Mhz
- Insertion Loss: <0,4 dB
- Power handling: 1000W
- Dimensions: 200x220x1000 mm
- Weight: 12Kg
Technical specifications for PCS/1002, double cavity:
- Form factor: Assembly, see photo
- Connectors: 7/16" - 7/8
- B.W. (-3db): 500 khz - 800Khz
- Insertion Loss: <0,3 dB
- Power handling: 2000W
- Dimensions: 200x400x1250 mm
- Weight: 18Kg
Technical specifications for PCS/1005, double cavity:
- Form factor: Assembly, see photo
- Connectors: 7/16 - 7/8
- B.W. (-3db): 600 khz - 1000Khz
- Insertion Loss: <0,2 dB
- Power handling: 5000W
- Dimensions: 1300x500x300 mm
- Weight: 29Kg
Technical specifications for PCS/1010, double cavity:
- Form factor: Assembly, see photo
- Connectors: 1+5/8
- B.W. (-3db): 600 khz
- Insertion Loss: <0,15 dB
- Power handling: 10KW
- Dimensions: 800x400x1250 mm
- Weight: 40Kg
Other models are available on request, use "Contact us" link at the bottom to send us your requirements.
|