FM radio high gain panel antennas

Descripción

FM radio panel antennas

Broadband Directional Panel , very sturdy construction, made of hot dipped galvanized steel. Suitable for high power radiating systems. All insulators are made of PTFE with stainless steel screws. All metallic parts are electrically grounded offering excellent protection against lightning. When panels are mounted on the four sides of a square tower a circular radiation pattern can be obtained. This is what the largest FM stations use in their setups, usually there are at least 4 such panels on the tower and the number can be much higher (8,12, 16 and more).

Technical specifications (7/16 connector 2KW)
– Frequency Band: 87,5-108 Mhz
- Impedancia: 50 ohmios
- VSWR: <1.2: 1
- Factor de forma: antena de panel
- Conectores: 7/16
- Ganancia: 7.5dBd
- Manejo de energía: 2KW
- Polarización: Vertical / horizontal
– Dimensions: 248 x 174 x 78cm
– Peso: 45Kg

Technical specifications (8/7 connector 5KW)
– Frequency Band: 87,5-108 Mhz
- Impedancia: 50 ohmios
- VSWR: <1.2: 1
- Factor de forma: antena de panel
- Conectores: 7/8
- Ganancia: 7.5dBd
– Manejo de potencia: 5KW
- Polarización: Vertical / horizontal
– Dimensions: 248 x 174 x 78cm
– Weight: 46Kg

Shopping list for 4x panel antenna array:
4x FM panel antenna
1x 2500W 1-step 4-way divider (if you are operating at band edge use 2-step divider please for better SWR performance)
4x Cable 5,5m long with appropriate connectors,  probably this one: Corrugated 1/2″ 5,5m + 2×7/16 male connectors
Antennas can be installed vertically/horizontally one above the other or on 4 sides of the tower

El patrón de radiación y otros detalles están disponibles a pedido, use el enlace "Contáctenos" en la parte inferior para contactarnos y obtener un posible descuento.