PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Norwegian    
  Top » Catalog » FM transmitters » FM transmitter kits » My Account  |  Cart Contents  |  Checkout   
Our products
FM transmitters->
  FM transmitter kits
  Cyber Max FM+ series
  FM radio packages
  Combo packages
  DAB+ digital radio transmitters
AM transmitters
Special sale items
RF accesories for transmitters->
FM amplifiers->
FM radio antennas
TV Transmitters->
TV amplifiers->
TV antennas
Coaxial cable and connectors
RDS Encoders
Stereo encoders
Wireless audio/video links
Electronic components->
Cool Stuff->
Solar power
Studio equipment->
DEVA Broadcasting->
RF service and design
What's New?
Attenuator 6dB 100W flange-mount
Attenuator 6dB 100W flange-mount
Our Radio Guides
How To Start Guide
Frequently Asked Questions
Making Your Own Transmitter
Coaxial cable
Audio Equipment
New Schematics
Power Supply
Recommended Reading
About PCS Electronics
Shipping & Returns
Current Stock
Frequently asked questions
Contact Us
Privacy Notice
Affiliate Program
Affiliate Information
Affiliate Program FAQ
Affiliate Log In
Gift Voucher FAQ
Safety Info

PayPal and credit cards accepted!
MAXPRO8015+ 15W FM exciter  

Qsonic PLL/VCO, excellent bass response, fast lock!

The new MAX PRO 8015+ FM exciters are fine-tuned, optimized and improved version of MAXPRO7015. They bring even better S/N ratio and MAXLINK II interface for easy no-soldering wiring to the new SE8000 DSP+ stereo encoder. They feature 15W of very clean power, QSonic VCO/PLL subsystem and everything else the previous 7015+ model had to offer.

Exciter carries a one year limited warranty on parts and labor against defects in materials and workmanship, except the RF final transistor.

You can find the manual for this (and other products) here.

How is MAXPRO8000 series better than MAXPRO7000 series?
- Supports previous MAXLINKI and new MAXLINK II for easy interfacing with the new SE8000 DSP+ without soldering
- MPX cable no longer needed for connection to new stereo encoders (Such as SE8000 DSP+).
- VU meter signals wired through MAXLINK II and LCD display flat cable which simplifies wiring considerably
- Further Improved S/N ratio across the band, designed for maximum spurious signal rejection (>80dBc). Some high-end customers appreciate this feature. Depending on operating frequency dBc can be >95dB down relative to the carrier.
- Self-resetting electronic PTC fuse (no more pesky fuse replacements).

What parameters can I change via remote control?
Its best that you look at the screen capture below. The program may change over time as we make enhancements, we will be adding more features soon! Feel free to ask for any features you may want.

PC control software

Can I upgrade my old CyberMaxFM+ 15W transmitter with new exciter?
Sure, just exchange the boards, take the 5000+ out and replace it with 8015.

Technical specifications:
- RF Output Power: 0 to 15 Watts, LCD power adjustment range can also be limited to 0-1W, 0-2W, 0-3W, 0-4W ... 0-15W, 0-full, this is done with a jumper (exact options vary depending on model).
- Output connector: 15 BNC
- Output Impedance: 50 Ohms
- Frequency range: 87.5-108MHz
- PLL Steps: 50KHz-500KHz, adjustable
- Frequency stability: +/- 20Hz
- Spurious/Harmonic rejection: Harmonics: >50dB, Spurious: (>80dB for MAXPRO7015)
- Power Supply 15W: 12-15V/3A or car battery
- Power connector: New design with plugin with 2 screw terminals or standard barrel type
- Quartz Locked PLL Frequency Control
- Ultra Stable, Ultra Clean Output
- No Expensive Test Equipment Required
- Audio performance: Less than 0.1% distortion, 20Hz-75KHz
- RF output ruggedness: SWR protection
- Polarity protection, temp protection
- Pre-emphasis, 50uS, 75uS or none
- Audio Input Impedance: 10Kohm, unbalanced
- Audio Input Level: 0 dB
- S/N ratio: >90 dB
- PC Board Size 15W: 100x125mm
- Audio connectors: 2 pins and solder pads, MAXLINK II
- RF monitor: solder pads

What is the Predrilled LCD front panel?
- This is a rectangular piece of aluminum with predrilled holes for LCD display, button and LED diodes. It also has 4 holes in the corner so you can easily mount this to your case. This makes it much easier to mount the transmitter into a nice looking case (eliminates the hard work with the LCD). This is of course an optional item.

What is that switch with LED diode?
MAXPRO8015+ is delivered without ON/OFF switch, there is a jumper that can be removed and connected to the switch. This is the switch we use in our 19" racks, it also has a built-in LED diode for better effect. Instructions on wiring this switch are shown on the main board. This is of course an optional item.

What is the RS232 IO board and why do I need it?
IO board is required, if you want to control MAXPRO8015+ remotely via RS232. It plugs into the LCD control module. RS232 cable is not included.

What is the IO board with 3x BNC connectors and why do I need it?
IO board is required, if you want to control MAXPRO8015+ remotely via USB, RS232 or GSM. The module plugs into the LCD control module. USB/RS232 cable is not included (standard cable is available everywhere). The three BNC cables can be used for MPX in, MPX out and 19KHz when used with stereo encoder. Optional item.

What is the Ethernet remote control module for?
This add-on card lets you connect this transmitter to the PC via Ethernet network. You can control and monitor the status of your transmitter over Ethernet or Internet. This is of course an optional item.

What is the GSM remote control module for?
This module plugs into IO board (RS232) and lets you control and monitor this transmitter via GSM phone with SMS messages or Android app. This is of course an optional item.

What is the Software+IOBOARD for changing logo?
This is a combination of special unlocked version of software and RS232 IO board, which is required to control MAXPRO8015+ remotely via PC/RS232. It plugs into the LCD control module. Software lets you change welcome text (logo); you can replace that text with your company name for example. Your customized text will be saved and used at every power-up. This is of course an optional item.

What else should I buy to construct a big 500W or 1000W or higher transmitter?
We really recommend these items to all users:
- Any of these pallets here, a power supply for these can be purchased here, don't forget a filter(LPFMAX series is ideal).
- Stereo encoder, any of these will do. SE8000 is ideal due to MAXLINK II.
- A rack enclosure from 1H to 3H, with fans, accessories and more...
- Use teflon RG142 50 ohm coax for internal connections inside your rack (teflon coax is easier to work with, it does not melt when hot). Make sure all coaxial cable leads are very short.

To look for a suitable antenna check: here.
To look for a suitable coaxial cable check: here.
To look for a suitable stereo encoder check: here.
To look for a suitable case check: here.

This product was added to our catalog on Monday 20 November, 2017.
 *Please select the quantity for each item you wish to order and click the 'Add To Cart' button below.
Displaying 1 to 12 (of 12 products) Result Pages:  1 
    Name   Model   Select   Price 
MAXPRO8015+ 15W with 2x16 LCD display with rotary button  MAXPRO8015+ 15W with 2x16 LCD display with rotary button     199.99EUR
MAXPRO8015+ 15W with 4x16 LCD display with rotary button  MAXPRO8015+ 15W with 4x16 LCD display with rotary button     209.99EUR
SE8000 DSP+ stereo encoder + MAXLINK II cable  SE8000 DSP+ stereo encoder + MAXLINK II cable     134.99EUR
RDSMAX8000 micro RDS encoder with 20cm 6-pin flat cable  RDSMAX8000 micro RDS encoder with 20cm 6-pin flat cable     79.99EUR
Pre-drilled LCD panel (rotary button 4x16)  Pre-drilled LCD panel (rotary button 4x16)     5.99EUR
Replacement LDMOS for MP8015+  Replacement LDMOS for MP8015+     19.99EUR
Ethernet remote control + cable (needs IO board w BNC)  Ethernet remote control + cable (needs IO board w BNC)     49.99EUR
14-pin DIGIAMP flat cable (40cm, 2 connectors)  14-pin DIGIAMP flat cable (40cm, 2 connectors)     5.99EUR
Switch with LED diode for rack  Switch with LED diode for rack     2.99EUR
Software+IOBOARD for changing logo  Software+IOBOARD for changing logo     39.99EUR
IO board (USB+RS232+3xBNC) with 20cm 6-pin flat cable  IO board (USB+RS232+3xBNC) with 20cm 6-pin flat cable     39.99EUR
Ethernet control with Barix IP audio upgrade  Ethernet control with Barix IP audio upgrade     199.99EUR
Displaying 1 to 12 (of 12 products) Result Pages:  1 
Shopping Cart
0 items
Quick Find

Use keywords to find the product you are looking for.
Our newsletter

Sign up and receive special deals, discount codes, news and product updates delivered to your inbox. Emails are sent out ~ 1x/month.

Visit Our Forum
Last posts:

Click to enter forum
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce

Other currencies

Contact Us | About PCS Electronics | Support | Frequently asked questions | How To Start Guide | Shipping & Returns
Show prices In US$ | Show prices In EUR | Manuals, software and support

All text on this site, product descriptions, guides and scripts
Copyright © by PCS Elektronik d.o.o.
Powered by osCommerce