PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Norwegian    
  Topp » Katalog » FM transmitters » FM transmitter kits » 15W Min konto  |  Handlekurv  |  Sjekk ut   
Våre produkter
Special sale items
FM transmitters->
  Cyber Max FM+ series
  FM transmitter kits
  FM radio packages
  FM Translators
  Combo packages
  DAB+ digital radio transmitters
RF accesories for transmitters->
FM amplifiers->
FM radio antennas
TV Transmitters->
PC Transmitters
TV amplifiers->
TV antennas
Coaxial cable and connectors
RDS Encoders
Stereo encoders
Wireless audio/video links
Instruments
Electronic components->
Software
Cool Stuff->
Solar power
Studio equipment->
DEVA->
RF service and design
AM transmitters
Hva er nytt?
Empty 1H 19-inch rack (3 buttons STL RX)
Empty 1H 19-inch rack (3 buttons STL RX)
46,88GBP
Våre radioguider
Hvordan starte guide
FAQ
Making Your Own Transmitter
Koaksialkabel
Lydutstyr
Skjema
Nye skjema
Vegviser
Forsterkere
Antenner
Strømforsyning
Anbefalt lesning
Lodding
Testimonials
Informasjon
Om PCS Electronics
Forsendelse & Retur
Handle
Support
Tilgjengelig på lager
FAQ
Forum
Kontakt oss
Distributører
Personopplsyninger
Affiliate Program
Affiliate Information
Affiliate Program FAQ
Affiliate Log In
Kort
Gavekort FAQ
Sikkerhetsinformasjon


PayPal and credit cards accepted!
MAXPRO2015+ FM exciter
[15W]
 


DIP switch or LCD display, full constant power across entire FM band without tuning and 15W of clean power!

The new MAX PRO 2015+ FM exciter is a simplified version of our MAX PRO 5015+ board and also a replacement for our old MAXPRO2000+. It is also a recommended replacement for our popular MAX PRO 3000+ board. Although this version lacks some of the features of the MAXPRO5015+ it still represents a big improvement over the old MAX PRO 2000+ and MAXPRO 3000+; The new MAX PRO 2015+ FM exciter bring more power, improved QSonicIII VCO/PLL subsystem and a number of hot new features, including remote control/telemetry, new alarms and ALC (Automatic Level Control). It covers entire FM band from 87.5 to 108MHz without tuning and offers 15W of clean RF power.

MAX PRO 2015+ was created as a low-cost high-performance exciter board and is based on the simplified version of MAX PRO 5015+. The result is a rugged and solid FM exciter with completely flat power output across the entire FM band at up to 15W, designed to run silently and cool 24/7. Why wait? Your dream FM exciter is a reality right now!

The exciter carries a one year limited warranty on parts and labor against defects in materials and workmanship, except the RF final transistor.

You can find the manual for this (and other products) here.

Can you give a simple example of use?
MAXPRO2015+ is very easy to setup:
1. Install the board into metal enclosure
2. Set power limit jumper to desired setting with jumpers (you can select 1W, 2W, 3W, 4W, 5W, 6W, 7W, 8W, 9W, 10W....or 15W)
3. If not using LCD display set the frequency with DIP switch (otherwise you can use LCD display)
4. Connect antenna, audio input and supply voltage
5. You can change power with LCD display or with jumpers.

How does it work with driving amplifiers?
MAXPRO2015+ is very easy to setup for driving a pallet amplifier:
- Set power limit jumper to desired drive power setting with jumpers (you can select 1W, 2W, 3W, 4W, 5W, 6W, 7W, 8W, 9W, 10W....or 15W)
- Connect the SWR and power reading voltage to PWR and SWR pins
- Set the power meter voltage sensitivity as you wish and the exciter will never drive your amp beyond preset value.

 

What parameters can I change via remote control?
Its best that you look at the screen capture below. The program may change over time as we make enhancements, we will be adding more features soon! Feel free to ask for any features you may want.

PC control software

Can I upgrade my old CyberMaxFM+ 15W transmitter with this exciter?
Only if your old unit was based on MAXPRO3000, MAX PRO 2000 or older exciter. Note that MAXPRO 2015+ is slightly narrower so some tweaking may be needed. BNC and most of the screws are in the same position so tweaking shouldn't be too difficult.

Technical specifications:
- RF Output Power: 0 to 15 Watts, power adjustment range can also be limited to 0-1W, 0-2W, 0-3W, 0-4W ... 0-15W, 0-full, this is done with a jumper (exact options vary depending on model).
- Output connector: either solder posts or BNC connector (ordered separately)
- Output Impedance: 50 Ohms
- Frequency range: 87.5-108MHz
- PLL Steps: 100KHz
- Frequency stability: +/- 20Hz
- Spurious/Harmonic rejection: Harmonics: >50dB, Spurious: -90dB
- Power Supply 13-15V/2.5A or car battery
- Power connector: solder posts on the board
- Quartz Locked PLL Frequency Control
- Ultra Stable, Ultra Clean Output
- No Expensive Test Equipment Required
- Audio performance: Less than 0.1% distortion, 20Hz-75KHz
- RF output ruggedness: SWR protection
- Polarity protection, temp protection
- Pre-emphasis, 50uS, 75uS or none
- Audio Input Impedance: 1Kohm, unbalanced
- Audio Input Level: 0 dB
- S/N ratio: >90 dB
- PC Board Size: 90x125mm
- Audio connectors: 2-pin header or solder posts
- RF monitor: solder pads

What is the Predrilled LCD front panel?
- This is a rectangular piece of aluminum with predrilled holes for LCD display, buttons and LED diodes. It also has 4 holes in the corner so you can easily mount this to your case. This makes it much easier to mount the transmitter into a nice looking case (eliminates the hard work with the LCD). This is of course an optional item.

What is the IO board and why do I need it?
IO board is required, if you want to control MAXPRO2015+ remotely via USB. It plugs into the LCD control module. USB cable is not included.

What is the Software+ USB IOBOARD for changing LCD text?
This is a combination of special unlocked version of software and USB IO board, which is required to control MAXPRO2015+ remotely via PC. It plugs into the LCD control module. Software lets you change welcome text (logo); you can replace that text with your company name for example. Your customized text will be saved and used at every power-up. This is of course an optional item.

To look for a suitable antenna check: here.
To look for a suitable coaxial cable check: here.
To look for a suitable stereo encoder check: here.
To look for a suitable case check: here.


Dette produktet ble lagt til katalogen Sunday 20 July, 2014.
 *Valg antall for varene du vil kjøpe og velg \Legg i handlekurv' knappen.
Viser 1 til 10 (av 10 produkter) Resultat sider:  1 
    Navn   Modell   Velg   Pris 
MAXPRO2015+ 15W FM transmitter board (no LCD/no connectors)  MAXPRO2015+ 15W FM transmitter board (no LCD/no connectors)     104.99EUR
10xMAXPRO2015+ 15W with LCD  10xMAXPRO2015+ 15W with LCD     1,149.99EUR
LCD module for MAXPRO2015+  LCD module for MAXPRO2015+     32.99EUR
Install BNC + RCA connectors  Install BNC + RCA connectors     6.99EUR
Software+IOBOARD for changing LCD text  Software+IOBOARD for changing LCD text     29.99EUR
USB IO board + 20cm 6-pin flat cable  USB IO board + 20cm 6-pin flat cable     19.99EUR
Predrilled LCD front panel  Predrilled LCD front panel     4.99EUR
RS232 IO board + 20cm 6-pin flat cable  RS232 IO board + 20cm 6-pin flat cable     12.99EUR
RS232 cable for IO board  RS232 cable for IO board     10.99EUR
Replacement 15W final for MP2015+  Replacement 15W final for MP2015+     14.99EUR
Viser 1 til 10 (av 10 produkter) Resultat sider:  1 
Handlekurv
0 varer
Søk
 

Bruk kodeord for produktet du ser etter.
Noteringer

Sign up and receive special deals, discount codes, news and product updates delivered to your inbox. Emails are sent out ~ 1x/month.

Meddelse
Besøk vårt forum
Siste poster:

Besøk forumet
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce
Valuta
   

Andre valuta

Kontakt oss | Om PCS Electronics | Support | FAQ | Hvordan starte guide | Forsendelse & Retur
Show prices In US$ | Show prices In EUR | Manualer, programvare og support

All tekst pa denne siden, produkt beskrivelser, guider og script
Kopirett © av PCS Elektronik d.o.o.
Laget av osCommerce