PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Norwegian    
  Top » Catalog » RF accesories for transmitters » RF filters for transmitters » My Account  |  Cart Contents  |  Checkout   
Our products
Special sale items
FM transmitters->
RF accesories for transmitters->
  Dummy loads
  Fans and blowers
  Mains power supply
  RF attenuators
  RF filters for transmitters
  RF output boards
  RF parts and connectors
  SWR and POWER meters
  Amplifier Control Boards
  RF combiners/splitters (FM&TV)
  Die cast enclosures
  Rack cabinets and boxes
  FM signal analyzers
  RF power resistors
FM amplifiers->
FM radio antennas
TV Transmitters->
PC Transmitters
TV amplifiers->
TV antennas
Coaxial cable and connectors
RDS Encoders
Stereo encoders
Wireless audio/video links
Instruments
Electronic components->
Software
Cool Stuff->
Solar power
Studio equipment->
DEVA Broadcasting->
AM transmitters - Coming back
RF service and design
What's New?
Pre-drilled LCD panel (rotary button 4x16)
Pre-drilled LCD panel (rotary button 4x16)
5.99EUR
Our Radio Guides
How To Start Guide
Frequently Asked Questions
Making Your Own Transmitter
Coaxial cable
Audio Equipment
Schematics
New Schematics
Wizards
Amplifiers
Antennas
Power Supply
Recommended Reading
Soldering
Testimonials
Information
About PCS Electronics
Shipping & Returns
Ordering
Support
Current Stock
Frequently asked questions
Forum
Contact Us
Distributors
Privacy Notice
Affiliate Program
Affiliate Information
Affiliate Program FAQ
Affiliate Log In
Vouchers
Gift Voucher FAQ
Safety Info


PayPal and credit cards accepted!
LPFMAX 2K+ 2KW FM LOW PASS FILTER with DIGIAMP  


LPFMAX 2K+ 2KW FM LOW PASS FILTER with DIGIAMP

Based on teflon laminate, with MICA caps, improved layout and multiturn precision trimmer for power reading adjustment. Mounts with screws directly to the heatsink. 2000W Low Pass filter with easy connect DIGIAMP system, built for our MAX PRO 6015/7015/8015 series exciters. The DIGIAMP interconnect system enables easy integration into a FM transmitter. All it takes is one flat cable (DIGIAMP). This connection enables measurement of SWR and Power, amplifier supply voltage, current and temperature. It also provides SWR protection and automatic output level limiting. Of course it also includes low pass filter as RF amplifiers produce harmonics at even multiples of fundamental frequency. If your harmonics fall on or near a TV channel or Maritime frequency you could cause severe interference to that channel. The most common cause of fines from federal agencies is due to TVI or other interference from your transmitter which generates a complaint. Use of this low pass filter is the best method of eliminating this kind of interference. The low insertion loss of this filters makes them well suited for use at power levels as low as 10 watts on up to 2000 watts!

These units are constructed using PTFE laminate for capacitors and silver-plated coil wire! SWR and PWR voltages are provided for power/swr measuring purpose. Two calibrating trimmers are provided as well to adjust correct power and swr measurment accuracy. SWR protection circuitry is provided as well and its sensitivity can be adjusted with one of the trimmers (requires MAX PRO exciter for ALC to work). When reflected power (SWR), current or output power reaches certain level swr protection output decreases RF output (either via MAXPRO exciter with ALC pin or via bias disable)..

A perfect companion for the pallet amplifiers, offering output filtering and swr protection!

Fits directly into our 1000-1500W ampbox, when used with our ampbox the output N connector can be directly soldered to the filter.

Technical specifications:
- Input/Output Impedance: 50 Ohms
- Insertion Loss: 0.25 dB typ.
- Power handling: 2000W with forced air ventilation
- Typical stop-band attenuation: >50dB
- Cut-Off Frequency: 120 MHz (-3dB down)
- Input/Output Connectors: solder pads for coax, output N connector can be directly soldered in our 1000-1500W ampbox.
- Duty Cycle Rated for continuous operation with forced air cooling

 

Use with MAXPRO FM exciter:
- Connect input and output with RG-142 or thicker PTFE coaxial cable.
- Mount to heatsink with screws, best done with our 1000-1500W ampbox.
- Connect with digiamp cable to our exciter
- Set all protection/limit trimmers to off first
- Set power/SWR trimmers for correct reading on LCD
- Now set tx to max intended power (for example 500W), than adjust SWR protection, power limit and current limit trimmers to the point where they almost start to reduce output power

Use without our FM exciter:
- Connect input and output with RG-142 or similar PTFE coaxial cable.
- Mount to heatsink with screws, best done with our 1000-1500W ampbox.
- Connect bias disable PAD on the filter to your pallet's bias voltage so that filter's protection circuit can pull bias voltage down. See all the photos for this product to understand how ALC works. Each pallet is a bit different so we can't tell you exactly how.
- Set all protection/limit trimmers to off first
- Set power/SWR trimmers for correct reading on LCD
- Now set tx to max intended power (for example 500W), than adjust SWR protection, power limit and current limit trimmers to the point where they almost start to reduce output power


What is included:
- 10K NTC resistor (temperature sensor)
- LPFMAX 2K+ filter


This product was added to our catalog on Thursday 20 July, 2017.
 *Please select the quantity for each item you wish to order and click the 'Add To Cart' button below.
Displaying 1 to 2 (of 2 products) Result Pages:  1 
    Name   Model   Select   Price 
LPFMAX 2K+ 2KW FM LOW PASS FILTER with DIGIAMP  LPFMAX 2K+ 2KW FM LOW PASS FILTER with DIGIAMP     96,79GBP
Universal 14-pin DIGIAMP flat cable (40cm) with connectors  Universal 14-pin DIGIAMP flat cable (40cm) with connectors     5,27GBP
Displaying 1 to 2 (of 2 products) Result Pages:  1 
Shopping Cart
0 items
Quick Find
 

Use keywords to find the product you are looking for.
Our newsletter

Sign up and receive special deals, discount codes, news and product updates delivered to your inbox. Emails are sent out ~ 1x/month.

Announcements
Visit Our Forum
Last posts:

Click to enter forum
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce
Currencies
   

Other currencies

Contact Us | About PCS Electronics | Support | Frequently asked questions | How To Start Guide | Shipping & Returns
Show prices In US$ | Show prices In EUR | Manuals, software and support

All text on this site, product descriptions, guides and scripts
Copyright © by PCS Elektronik d.o.o.
Powered by osCommerce