PCSLPF6000+ FM LOW PASS FILTER with DIGIAMP
400W Low Pass filter with easy connect DIGIAMP system, built for our MAX PRO 5015 series exciters. The DIGIAMP interconnect system enables easy integration into a FM transmitter. All it takes is one flat cable (DIGIAMP). This connection enables measurement of SWR and Power, amplifier supply voltage and current and amplifier temperature. It also provides SWR protection and automatic output level limiting. Of course it also includes low pass filter as RF amplifiers produce harmonics at even multiples of fundamental frequency. If your harmonics fall on or near a TV channel or Maritime frequency you could cause severe interference to that channel. The most common cause of fines from federal agencies is due to TVI or other interference from your transmitter which generates a complaint. Use of the nicely priced PCS 6000 low pass filter is the best method of eliminating this kind of interference. The low insertion loss of the PCS-6000 filters makes them well suited for use at power levels as low as 1 watts on up to about 400 watts!
These units are constructed using high-quality 500V mica capacitors and silver-plated coil wire! SWR and PWR voltages are provided for power/swr measuring purpose. Two calibrating trimmers are provided as well to adjust correct power and swr measurment accuracy. SWR protection circuitry is provided as well and its sensitivity can be adjusted with one of the trimmers (requires MAX PRO 3000, 5015 or 4025). When reflected power (SWR) reaches certain level swr protection output decreases RF output. ALC automatic level control also requires MAX PRO 4025+, 5015+ or 3000+.
A perfect companion for the pallet amplifiers, offering output filtering and swr protection!
- Input/Output Impedance: 50 Ohms
- Insertion Loss: 0.3dB typ.
- Power handling: 400W with ventilation
- Typical stop-band attenuation: >50dB
- Cut-Off Frequency: 120 MHz (-3dB down)
- Input/Output Connectors: solder pads for coax
- Duty Cycle Rated for continuous operation with forced air cooling
- Built-in: power meter, swr meter, voltage meter, temperature sensor, current meter