High gain 50W FM pallet amplifier with 24V LDMOS
This high gain pallet has been designed to produce full output power from under
100milliwatts of drive power. It also features output power adjustment trimmer.
Each pallet amplifier we sell is designed and tested using vector network analyzer and spectrum analyzer.
Our amplifier products are manufactured using an automatic surface mount assembly process.
This pallet is optimized for 24-28V operation, using a lower voltage will result
in lower output power.
This pallet is well suited as a driver stage or final amplifier.
RF output power can be adjusted by lowering the supply voltage or with a trimmer.
As with any pallet you will need a heatsink, power supply, filter and fans to use it.
More information is available in included amplifier data sheet.
- 80 – 120MHz (also available for 144MHz and other frequency bands, email for info)
- Input/output 50 ohms.
- Pout: 50W typical
- Drive power required: < 100mW for full 50W
- Requires 24V DC @ 5A
- No bias adjustments or RF circuit tuning is required.