|
SMALL IN SIZE, BIG IN PERFORMANCE AND FEATURES, NOW IN LPFM-1W VERSION! This unit is a real eye-candy. With 2x5 LED VU meter and backlit LCD display wrapped up in a tiny and stylish black anodized enclosure this unit really draws attention. But CyberMaxMicro 2+ is not just about the looks, this jewel packs a lot under the hood, too. High performance stereo encoder with balanced inputs, limiter, precise preemphasis, MPX filter and low pass filter feeds the PLL-controlled FM modulator. There's place for optional RDS daughter-board inside as well. Covers the entire band from 87.5 to 108 MHz. Designed for 24/7/365 operation. Really handy for experimenting, MPX input can be added easily. Ideal for guided tours, realtor-type advertising (just add any Mp3 player), indoor use for re-broadcasting internet radio stations or a small community radio station. DOES NOT use the ill-famed Rohm chip, entirely discrete stereo encoder! The manual for the LCD control unit is here. The manual for the external enclosure is here.Technical specifications: - Rated output power: 500mW-2000mW depending on model - RF Output connector: F - RF Output impedance: 50 ohm - Frequency range: 87.5 - 108 MHz (ask for other bands) - Modulation: FM stereo, RDS if installed - Audio inputs: 3.5 stereo jack due to space constraints, external XLR possible - Audio input: 1Vpp - Frequency amplitude: 30Hz - 15kHz (limited by standards) - Harmonic distortion: < 0,15%, 30Hz - 15kHz - Pre-emphasis: Flat, 50uS, 75uS - Power requirement: 12-15V/1A stabilized - Limiter: Yes, built-in - 2x5 LED: VU-meter (Music) or LIGHT SHOW, selectable via LCD - Can be adapted for 3.6V to 5V, if necessary - Dimensions: 165x155x35 - Ambient temperature: -5° to +50°C To obtain RDS also purchase RDS daughter board, we will install you for you! It is controlled via RS232 port and windows application!
|