This unit was replaced by PCIMAX3000+, you can find it HERE!

This unit is a real eye-candy. With 2x10 BARGRAPH LED VU meter and backlit LCD display wrapped up in a tiny and stylish black anodized enclosure this unit really draws attention. But CyberMaxMicro+ (V3) is not just about the looks, this jewel packs a lot under the hood, too. And now finally with hot new feature, remote control via PC; you can now set frequency, output power, stereo/mono mode and any of the RDS parameters right there on your desktop. USB or RS232 cable and our software is all it takes. Another hot feature lets you set and change RDS parameters via unit's LCD control, eliminating the need for a computer for changing RDS settings. You can enter PS, RT and a number of other parameters right there on the LCD module.

But this is not all, unit keeps all of the good stuff from previous revision; high performance stereo encoder with balanced inputs, limiter, precise preemphasis, MPX filter and low pass filter feed the PLL-controlled FM modulator. There's place for optional RDS daughter-board inside as well. Covers the entire band from 87.5 to 108 MHz. Designed for 24/7/365 operation. Really handy for experimenting, MPX input can be added easily. Ideal for guided tours, realtor-type advertising (just add any Mp3 player), indoor use for re-broadcasting internet radio stations or a small community radio station. DOES NOT use the ill-famed Rohm chip, entirely discrete stereo encoder!

Look HERE for all manuals, drivers and support.

Technical specifications:
- Rated output power: 0mW-2500mW, max. depending on model
- RF Output connector: F
- RF Output impedance: 50 ohm
- Frequency range: 87.5 - 108 MHz (ask for other bands)
- Modulation: FM stereo, RDS (if installed)
- Audio inputs: 3.5 stereo jack due to space constraints, external XLR possible
- Audio input: 1Vpp
- Frequency amplitude: 30Hz - 15kHz (limited by standards)
- Harmonic distortion: 0,15%, 30Hz - 15kHz
- Pre-emphasis: Flat, 50uS, 75uS
- Power requirement: 12-15V/1.5A stabilized
- Limiter: Yes, built-in
- 2x10 LED: VU-meter (Music) or LIGHT SHOW, selectable via LCD
- Dimensions: 165x155x35
- Ambient temperature: -5° to +60°C

What's included with each transmitter?:
- FM transmitter in enclosure
- Mains power supply, 110-240V (universal world wide)
- USB/RS232 IO board installed
- Handy telescopic antenna (see photos)

IMPORTANT:
- To obtain RDS functionality also purchase RDS daughter board, we will install it for you! You can set RDS parameters via LCD module or PC.
- You will need to buy local mains power plug, probably you have one at home already, it is the type used for PC and can be purchased easily for about 1US$ in PC/electronics shops.

How can I set RDS parameters, such as country, PI, RT etc?
You have two options, you can set the parameters via LCD module or via PC with the free included program and USB/RS232 cable.

What is part15 model about?:
- This is a low-power version of FM transmitter, with a range of about 100-200 meters