PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Norwegian    
  Top » Catalog » FM transmitters » Boxed FM transmitters » Cyber Max FM+ series » My Account  |  Cart Contents  |  Checkout   
Our products
PC Transmitters
FM transmitters->
  FM transmitter kits
  Boxed FM transmitters->
    Cyber Max FM+ series
    PCS D&M FM transmitters
  FM radio packages
  FM Translators
  DAB+ digital radio transmitters
RF accesories for transmitters->
FM amplifiers->
FM radio antennas
TV Transmitters->
TV amplifiers->
TV antennas
Coaxial cable and connectors
RDS Encoders
Stereo encoders
Wireless audio/video links
Instruments
Electronic components->
Software
Ham Stuff->
Solar power
Studio equipment->
RF service and design
AM transmitters
What's New?
4 ch pro TV exciter, ISDB-Tb MPEG2/4 FULL HD (4xHDMI)
4 ch pro TV exciter, ISDB-Tb MPEG2/4 FULL HD (4xHDMI)
2,999.99EUR
Our Radio Guides
How To Start Guide
Frequently Asked Questions
Making Your Own Transmitter
Coaxial cable
Audio Equipment
Schematics
New Schematics
Wizards
Amplifiers
Antennas
Power Supply
Recommended Reading
Soldering
Testimonials
Information
About PCS Electronics
Shipping & Returns
Ordering
Support
Current Stock
Frequently asked questions
Forum
Contact Us
Distributers
Privacy Notice
Affiliate Program
Affiliate Information
Affiliate Program FAQ
Affiliate Log In
Vouchers
Gift Voucher FAQ
Safety Info


Visa, Amex and other cards accepted, protected with 128-bit SSL

PayPal accepted!
CYBER MAX FM+ 1000W  


OUR POPULAR CYBERMAX FM+ 200W/400W/600W/1000W FM TRANSMITTER SERIES!

V4 is out! CYBER MAX FM+ now contain our new enhanced FM exciter finally bringing direct power readout and a wide range of other functions. CYBER MAX FM+ are perfect for demanding broadcasters, operating in the whole band II, from 87.5 to 108 MHz (operation below 87.5MHz is possible as well at reduced power output, read manual on how to enable Japanese band). This unit in large 2H 19" rack enclosure contains mains power supply and offers plenty of power (200W, 400W, 600W or 1000W). Large heavy-duty ball-bearing 80x80mm cooling fans with protection mesh take care of any excessive heat easily. Transmitter consists of a stereo encoder with pre-emphasis circuit, active low-pass filter, our professional series PLL synthesizer, wideband no-tune RF stage with temp protection, good output RF filter and optional RDS and/or DSP processor. You can select the performance range that is most suitable for your budget. Unit is rugged and made for 24/7/365 operation, each comes with a wide-angle high contrast backlit LCD display. In our opinion the best quality/price ratio possible.

RDS parameters can be programmed with the help of a PC via serial RS232 connection (cable and software included).
Depending on the model this unit can give up to 200W/400W/600W/1000W of clean RF power, exact power output can vary about +/- 10% depending on exact frequency, ambient temperature and load matching.

All our manuals and software are available here.

General features:
- New exciter MAX PRO 5015+
- Great stereo sound with excellent separation
- USB, RS232 or Ethernet (optional) remote control via PC
- GSM wireless telemetry and android app also available on request
- Standard 19" 2H rack, clean design and high quality manufacturing
- Low distortion and good Signal/Noise ratio
- Modular construction, internal boards can be replaced one by one
- Built-in CPU system for controlling and monitoring
- Easy change of frequency and other parameters (UP/DOWN keys, no tuning required)
- TEMP protection
- SWR protection
- Professional grade RDS encoder!
- Friendly user interface, keys can be locked with an internal jumper
- In our opinion the best quality/price ratio possible.
- Industrial quality and rugged switching-mode power supply

What parameters can I change via PC remote control?
Its best that you look at the screen capture below. The program may change over time as we make enhancements, we will be adding more features soon! Feel free to ask for any features you may want.

USB/RS232 remote control via PC


Technical specifications:
RF SECTION
- Output power: 200W/400W/600W/1000W depending on the model, adjustable internally
- Output impedance 50 unbalanced, VSWR less than 2:1 for full output
- Output connector 200W/400W/600W N female (rear panel )
- Output connector 1000W 7/16 female (rear panel )
- Frequency range 87.5 to 108MHz
- PLL step 50KHz (more on request)
- RF Spurious > -80 dBc @ +- 1MHz min. out of carrier
- RF Harmonics > -60 dBc Standard
- Monitoring Led: Power on, SWR/TEMP/PLL warning
- Modulation capability: FM

AUDIO SECTION
- Audio connectors: RCA (cinch) or XLR (DSP version)
- Audio level required: 1Vpp
- Audio input impedance: 10Kohms resistive, balanced
- Pre-emphasis Flat, 50 or 75usec
- Harmonic distortion ( THD ) <0.1% ( 0.05% typ. )
- Channel separation 50 dB min., ( 65 dB typ. ), 20Hz to 15kHz, DSP model
- S/N Ratio with CCIR unweighted: 80dB
- S/N Ratio with CCIR weighted: 78dB
- Frequency amplitude: 0.5dB, 30Hz - 15kHz

GENERAL
- AC mains power: 110-240V 50/60Hz universal, works everywhere on this planet
- Ambient temperature: -5 to +45C
- External dimensions 200W/400W ( W x D x H ) 19" x depth (170mm) x height 2HE (88mm)
- External dimensions 600W ( W x D x H ) 19" x depth (170mm) x height 2HE (88mm)
- External dimensions 1000W ( W x D x H ) 19" x depth (492mm) x height 2HE (88mm)
- Physical weight 4Kg (200-400W), 8Kg (600W), 13Kg (1000W)
- Volumetric weight up to 25Kg

Note: CyberMax FM+ is available in 3 versions.
- ANALOG version has a very good analog stereo encoder with compressor and a sharp notch at 19KHz
- DSP version has a profesional DSP stereo encoder
- MPX input version without stereo encoder for those who have external DSP processors, use MPX STL link or don't need stereo at all

Model name DSP
processor
XLR
inputs
Full unit name
ANALOG No Yes CyberMaxFM+ ANALOG
DSP Yes Yes CyberMaxFM+ DSP
MONO No No CyberMaxFM+ MPX input


What are the benefits of DSP stereo encoder?
Very shart input filters with a deep 19KHz notch, advanced signal processing with compressor and limiter, all adjustable via LCD display. The number of settings is indeed quite fascinating, you can also set gain for each audio channel, compression ratio etc.

How much range can I expect?
You can read more about range in this guide HERE.
While 400W can give you up to 40km of range (and sometimes more) in favourable conditions with good antenna high above terrain and good receivers used on the other side you will need a lot more power for solid coverage in all the difficult spots and with unsensitive receivers as far as 40km away.

What is RDS?
Radio Data System, basically it displays station name and sometimes song name and similar information on a compatible radio receiver. Very popular in Europe, less so in the US. Requires connection to a PC at the time of programming, but retains settings even when powered off. Serial programming cable for COM port is included. RDS requires RDS upgrade option so be sure to add it, if you need it.

WHAT CAN I USE AS AUDIO SOURCE?
- A high quality mixer with telephone hybrids, such as this very popular unit.
- Professional broadcasting microphone with noise-free stand, such as this one.
- Your PC. Just plug audio cable into your sound card. Add SAM broadcasting.
- CD player, MP3 player or any other music reproduction system

WHAT ELSE WILL I NEED AND IT WASN'T INCLUDED?
- Requires mains cable, which can be purchased in your country (each country has a different mains plug and we don't carry all). This is standard cable used in your PC for example and its price is typically around 1 US$ and less. You can get it in any electronics store, such as radio shack, circuit city, any computer store etc.
- You will also need antenna, you can order one HERE
- You will also coaxial cable to connect antenna and transmitter, you can order it HERE
- You will probably need some connectors as well, it is good to have several adapters ready as well as they always come handy, check HERE
- You will need audio source (mixer, cd player, microphone etc). It is a good idea to use PC as audio source and run some kind of audio scheduling software, such as Jazler, Raduga or winamp. Winamp plugins such as rocksteady exist and can make your sound even better.

Where can I buy everything I need to start in a package, including antenna and everything else?
You can check our All-inclusive transmitter packages, these include antenna, coaxial cable and mains power supply. Another way to go would be to select your preferred antenna here and coaxial cable with connectors here, this way you can configure your own package.

 




This product was added to our catalog on Saturday 20 February, 2010.
 *Please select the quantity for each item you wish to order and click the 'Add To Cart' button below.
Displaying 1 to 5 (of 5 products) Result Pages:  1 
    Name   Model   Select   Price 
CyberMAXFM+ 1000W analog  CyberMAXFM+ 1000W analog     2,679.99EUR
CYBER MAX FM+ 1000W DSP  CYBER MAX FM+ 1000W DSP     2,699.99EUR
CYBER MAX FM+ 1000W MONO MPX  CYBER MAX FM+ 1000W MONO MPX     2,569.00EUR
Upgrade to RDS  Upgrade to RDS     99.99EUR
Ethernet remote control module  Ethernet remote control module     89.99EUR
Displaying 1 to 5 (of 5 products) Result Pages:  1 
Shopping Cart
0 items
Quick Find
 

Use keywords to find the product you are looking for.
Our newsletter

Sign up and receive special deals, discount codes, news and product updates delivered to your inbox. Emails are sent out ~ 1x/month.

Announcements
Visit Our Forum
Last posts:

Click to enter forum
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce
Currencies
   

Other currencies

Contact Us | About PCS Electronics | Support | Frequently asked questions | How To Start Guide | Shipping & Returns
Show prices In US$ | Show prices In EUR | Manuals, software and support

All text on this site, product descriptions, guides and scripts
Copyright © 2003-2014 by PCS Elektronik d.o.o.
Powered by osCommerce