Complete FM amplifier module with DIGIAMP interface

£1,73£2.613,54

In stock
£164,65

In stock

£209,07

In stock

£261,35

In stock

£609,82

In stock

£662,09

In stock

£696,94

In stock

£784,06

In stock

£958,29

In stock

£1.393,88

In stock

£1.655,24

In stock

£1.829,47

In stock

£2.613,54

In stock

£26,13£500,92
£34,84£139,38

In stock

£34,84£191,65
£6,96

In stock

£22,64

In stock

£2,17£91,47

In stock

£2,17£113,24

In stock

£39,19

In stock

£1,73£20,90

Prices shown are without VAT (paid only in EU)

Description

Complete FM amplifier module with DIGIAMP interface

Building a FM transmitter just got a lot easier with this building block system, its just like putting together LEGO blocks.

Complete FM amplifier modules by PCS Electronics includes everything you could want from an amplifier:
– amplifier module
– heatsink
– filter
– heavy duty strong efficient fan
– low pass filter
– supply current meter (ampere meter)
– directional couplers for swr and power measurements
– SWR and TEMP protection (requires MAXPRO FM exciters from PCS)
– DIGIAMP control interface (requires MAXPRO series exciters from PCS)
– ALC; automatic level control assures constant output power across entire FM band (requires MAXPRO series exciters from PCS)
– RF shielded enclosure
– RF blocked DC supply lines and control signals
– DC/DC power supply provides 12-16V for other devices (generated from 24-48V supply line) (not included in 1000W ampbox)

Technical specifications:

– Dimensions: Fits our 2H rack case perfectly
– Power rating: Check below
– Power OUT connector: N female or 7/16
– Power IN connector: BNC or N
– On board DCDC converter: Accepts 17-50V, current rating up to ~2A
– Low pass filter: 7 poles, if installed, with digiamp interface
– Directional coupler: Frequency compensated 1KW or 2KW

How do I use this amplifier?

We recommend that you use MAX PRO 6000 for this amplifier. Due to the
DIGIAMP interface it is very easy to connect them together. DIGIAMP interface
provides all control signals to the FM exciter module, such as SWR, PWR; temperature,
amplifier supply current and voltage, and it also provides for SWR and temp
protection. You can read more about using this amplifier module here.
To use this amplifier you will need these things:
– FM exciter/transmitter, about 5W of power, MAX PRO 6000+ are recommended.
– Mains power supply, 48V, power rating about 30-40% more than the output power.
– Enclosure, such us our rack enclosure

 

What is included with each configuration:

Empty ampbox (0-800W):
– Perfectly fits our 2H racks for transmitters (0-300W) – order separately
– Designed for N connector (N female panel mount/flange PTFE) – order separately
– Accepts our DIGIAMP filters or universal DCMAX board – order separately
– Accepts pass-through capacitors – order separately
– You can order mains power supply here – order separately
FM and TV pallet amplifiers are available – order separately
– Suitable fans are available here – order separately
– This is just an empty ampbox, no fan and no pallet or anything else inside
– Size; LxWxH 201 x 124 x 84mm (no fan bracket and connector)
– Size; LxWxH 252 x 124 x 84mmx (with fan bracker and connector)
– Weight: approx 2Kg

Empty ampbox (1000-1500W):
– Perfectly fits our 2H racks for transmitters (0-1000W) – order separately
– Designed for 7/16 connector (7/16 female panel mount) – order separately
– Accepts pass-through capacitors – order separately
– You can order mains power supply here – order separately
FM and TV pallet amplifiers are available – order separately
– Suitable fans are available here – order separately
– Just an empty ampbox, no fan and no pallet or anything else inside
– Size; LxWxH 354 x 164 x 84mm (no fan bracket and connector)
– Size; LxWxH 425 x 164 x 84mmx (with fan bracker and connector)
– Weight: about 5Kg


Empty ampbox (1500-3000W):

– Perfectly fits our 3H racks for transmitters (0-2500W)
– Designed for 7/16 connector (7/16 female panel mount)
– Accepts our DIGIAMP filters or universal DCMAX board – order separately
– Accepts pass-through capacitors – order separately
– You can order mains power supply here – order separately
FM and TV pallet amplifiers are available – order separately
– Suitable fans are available here – order separately
– Just an empty ampbox, no fan and no pallet or anything else inside
– Size; LxWxH 354 x 204x 126mm (no fan bracket and connector)
– Size; LxWxH 460 x 245x 126mm (with fan bracker and connector)
– Weight: about 9Kg

150W ampbox amplifier with digiamp
– Perfectly fits our 2H racks for transmitters (0-300W)
– Ampbox with heatsink
– 200W pallet (48V) MRF300
– DCDC converter to 12V for exciter
– PCS LPF 1KW PTFE filter with digiamp
– Fan 80×80
– Connectors N output, BNC or N input
– Size; LxWxH 252 x 124 x 84mm
– Weight: approx 5Kg
– You can order mains power supply here

400W ampbox amplifier with digiamp
– Perfectly fits our 2H racks for transmitters (0-300W)
– Ampbox with heatsink
– 600W pallet (48V) 2xMRF300
– DCDC converter to 12V for exciter
– PCS LPF 1KW PTFE filter with digiamp
– Fan 80×80
– Connectors N output, BNC or N input
– Size; LxWxH 252 x 124 x 84mm
– Weight: approx 5Kg
– You can order mains power supply here

600W ampbox amplifier with digiamp
– Perfectly fits our 2H racks for transmitters (0-300W)
– Ampbox with heatsink
– 900W coax version of pallet with BLF188XR
– DCDC converter to 12V for exciter
– PCS LPF 1KW PTFE filter with digiamp
– 48V heavy duty 80x80x32 fan
– Connectors N output, BNC or N input
– Size; LxWxH 252 x 124 x 84mm
– Weight: approx 3Kg
– You can order mains power supply here

800-900W ampbox amplifier with digiamp
– Perfectly fits our 2H racks for transmitters (0-800W)
– Ampbox with heatsink
– 1000W planar pallet with BLF188XR (48V)
– DCDC converter to 12V for exciter
– PCS LPF 1KW PTFE filter with digiamp
– 48V heavy duty 80x80x32 fan
– Connectors N output, BNC or N input
– Size; LxWxH 252 x 124 x 84mm
– Weight: approx 3Kg
– You can order mains power supply here

Technical specifications for 1000W ampbox:
– Perfectly fits our 2H racks for transmitters (0-1000W)
– 2x 80x80x32mm fan, heavy duty 48V
– PCS LPF 2KW PTFE filter with digiamp
– 40-50 Volts @ 40ADC
– 86-110MHz
– ART1K6 1400W 50volt PLANAR LDMOS Technology.
– Input/Output 50 ohms
– Pout 1100W min.5-7 watt input typical
– P1dB 1050W typical.
– 22 dB gain minimum.
– Connectors 7/16 output, BNC or N input
– Size; LxWxH 425 x 164 x 84mm
– Weight: about 5,5Kg
– You can order mains power supply here

Technical specifications for 1500W ampbox:
– Perfectly fits our 3H racks for transmitters (0-1000W)
– 2x 120x120x32mm fan, heavy duty 48V
– PCS LPF 2KW PTFE filter with digiamp
– 65Volts @ 40ADC
– 86-110MHz
– 2x ART1K6 or 2xBLF188XR LDMOS planar pallet technology.
– Input/Output 50 ohms
– Pout 1500W min. 6-7 watt input typical
– 22 dB gain minimum.
– Connectors 7/16 output, BNC or N input
– Size; LxWxH 425 x 164 x 84mm
– Weight: about 5,5Kg
– You can order mains power supply here

Technical specifications for 2000W ampbox:
– Perfectly fits our 3H racks for transmitters (0-3000W)
– 2x 120x120xmm fan, heavy duty super speed 48V
– PCS LPF 2KW PTFE filter with digiamp
– 50 Volts @ 50ADC
– 86-110MHz
– 2xART1K6 or similar 50volt LDMOS Technology.
– Input/Output 50 ohms
– Pout 1900W min. 10 watt input typical
– P1dB 1800W typical.
– 22 dB gain minimum.
– Connectors 7/16 output, BNC or N input
– Size; LxWxH 460 x 245x 126mm
– Weight: about 10Kg
– You can order mains power supply here

Technical specifications for 2500W ampbox:
– Perfectly fits our 3H racks for transmitters (0-3000W)
– 2x 120x120xmm fan, heavy duty super speed 48V
– PCS LPF 3KW PTFE filter with digiamp
– 50 Volts @ 60ADC
– 86-110MHz
– 2xART1K6 or similar 50volt LDMOS Technology.
– Input/Output 50 ohms
– Pout 2500W min. 10 watt input typical
– P1dB 2450W typical.
– 22 dB gain minimum.
– Connectors 7/16 output, BNC or N input
– Size; LxWxH 460 x 245x 126mm
– Weight: about 12Kg
– You can order mains power supply here

Technical specifications for 3000W ampbox:
– Perfectly fits our 3H racks for transmitters (0-3000W)
– 2x 120x120xmm fan, heavy duty super speed 48V
– PCS LPF 3KW PTFE filter with digiamp
– 64 Volts @ 60ADC
– 86-110MHz
– 2xART2K0 50volt LDMOS Technology.
– Input/Output 50 ohms
– Pout 3100W min. 10 watt input typical
– P1dB 2950W typical.
– 22 dB gain minimum.
– Connectors 7/16 output, BNC or N input
– Size; LxWxH 460 x 245x 126mm
– Weight: about 12Kg
– You can order mains power supply here

You may need other accesories:
– You can order mains power supply here
FM and TV pallet amplifiers are available – order separately
FM exciters and TV exciters are available as well – order separately
– Suitable fans are available here – order separately
– Just an empty ampbox, no fan and no pallet or anything else inside
– Size; LxWxH 390x165x88mm
– Weight: about 9Kg

SOME PHOTOS ARE SHOWN WITH FM EXCITER installed on the top (holes are
there for easy installation), however this EXCITER is not included with the
amplifier!

Additional information

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.