CYBERMAXTV+ SE2+ 10W/20W VHF I + III transmitter

 3,49 529,99

In stock
 509,99

In stock

 529,99

In stock

 109,99

In stock

 89,99

In stock

 109,99

In stock

 119,99

In stock

 3,99 7,99
 5,99 227,00

In stock

 29,99

In stock

 29,99

In stock

Prices shown are without VAT (paid only in EU)

Description

CYBERMAXTV+ SE2+ WITH 10W / 20W OF POWER, BASED ON THE NEW TVMAX8000V+!

Our CYBER MAX TV+ series is out, finally with a range of nicely priced TV transmitters for small TV stations. Build your own TV studio and broadcast your own TV program! Transmit movies from your PC to your living room, re-transmit the TV program you’ve never been able to receive in your valley, run a college TV station, cover rural areas of Africa with TV signal from satellite stations, run a hotel cable system info pages or just have fun… this unit will keep you busy during the cold winter evenings and is sure to provide lots of fun for many months to come!

This unit in a 1H 19″ rack enclosure offers 10W / 20W of power in the VHF low or VHF high band. Transmitter is built reliably  for 24/7/365 operation. Unit runs from 48V (10W model) or 54-60V (20W model). Gives 1-15km of range depending on antenna type used on transmitting and receiving side. High-gain yagi antennas on both sides might offer even more range in favorable conditions. In our opinion the best quality/price ratio possible.

Look HERE for all manuals, drivers and support.

 

General features:
– Rotary encoder LCD display
– Uses our standard 19″ 1H rack
– Built-in CPU for controlling and monitoring
– Adjustable TV channel (via LCD module with up/down keys)
– Easily adjustable TV and sound standard (via LCD module)
– Built-in test signal generator
– Supports all analog world TV standards: All PAL versions, SECAM, NTSC
– SWR protection
– Stereo sound possible with stereo board
– Friendly user interface
– Output power 10W model: 10W (typically 8-12W), adjustable from 0 to Pmax via LCD display
– Output power 20W model: 20W (typically 17-24W), adjustable from 0 to Pmax via LCD display
– Output impedance 50 Unbalanced, VSWR less than 2:1 for full output
– Output connector BNC female ( rear panel )
– Frequency range model HIGH: TV VHF HIGH band 175-225MHz
– Frequency range model LOW: TV VHF LOW band 55MHz-88MHz
– Audio connectors: 2x RCA (cinch) and 2x XLR (balanced)
– Audio level: 1Vpp
– Video level: 1Vpp
– Audio input impedance: 10K resistive, unbalanced
– Pre-emphasis 50 or 75usec
– Power supply 10W model: 48V/2,5A universal, barrel connector (center positive)
– Power supply 20W model: 54-60V/2A universal, barrel connector (center positive)
– Rack size: standard 1H
– Weight 2kg, shipping shows more due to size!

What is the DSP Stereo Encoder for USA/NTSC?
– This add-on card enables stereo sound, it was designed for NTSC system, used in USA and most of South/North America.

To purchase coaxial cable and connectors for this transmitter look HERE.

To purchase antenna for this transmitter look HERE.

To purchase coaxial cable and connectors for this transmitter look HERE.

You can add wireless audio/video link to this transmitter, for example install the transmitter on the top of a small hill or mountain and transmit signal from your studio in the city. You can find suitable audio/video link (up to about 15km range) HERE.

 

Additional information

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.