|
PCS 7000, 7002 & 7003 LOW PASS FILTERS All FM transmitters produce harmonics at even multiplies of your fundamental frequency. If your harmonics fall on or near TV channel or Maritime frequency you could cause severe interference on that channel. The most common cause of fines from federal agencies is due to TVI or other interference from your transmitter which generates a compliant. Use of a low pass filter is the best method of eliminating this kind of interference. Since the insertion loss of these filters is less than .01dB, these filters are well suited for use on power levels as low as 100 milliwatts on up to 300 watts.
Technical specifications: - Input/Output Impedance 50 Ohms - Insertion Loss <0.2dB (0.15dB for PCS 1000) - Cut-Off Frequency 120 MHz (-3dB down) - Input/Output Connectors 7/16" DIN - Duty Cycle Rated for continuous operation
|