PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Norwegian    
  Topo » Catálogo » FM transmitters » FM transmitter kits » Minha Conta  |  Conteudo do cesto  |  Verificação Final   
Categorias
PC Transmitters
FM transmitters->
  FM transmitter kits
  Boxed FM transmitters->
  FM radio packages
  FM Translators
  DAB+ digital radio transmitters
RF accesories for transmitters->
FM amplifiers->
FM radio antennas
TV Transmitters->
TV amplifiers->
TV antennas
Coaxial cable and connectors
RDS Encoders
Stereo encoders
Wireless audio/video links
Instruments
Electronic components->
Software
Ham Stuff->
Solar power
Studio equipment->
RF service and design
AM transmitters
O que há de novo?
Ethernet remote control module
Ethernet remote control module
89.99EUR
Nossos Manuais de rádio
Como Começar
Questões Frequentes
Making Your Own Transmitter
Cabo Coaxial
Equipamento de Audio
Esquemas
Novos esquemas
Wizards
Amplificadores
Antenas
Power Supply
Recomendado Lêr
Soldar
Comentarios
Informação
Sobre PCS Electronics
Entrega e devolução
Requisitar
Sopporte
Actual Stock
Questões frequentes
Forum
Contacte-nos
Distribuidores
Nota de Privacidade
Affiliate Program
Affiliate Information
Affiliate Program FAQ
Affiliate Log In
Vouchers
Cheques prenda FAQ
Seguran‡a


Visa, Amex and other cards accepted, protected with 128-bit SSL

PayPal accepted!
MAX PRO 5000+ 15W, 25W, 40W, 50W with QSonicII  


QsonicII PLL/VCO, excellent bass response, fast lock and up to 50W of power!

The new MAX PRO 5000+ FM exciters bring more power, improved QSonicII VCO/PLL subsystem and a number of hot new features, including RS232 remote control, telemetry, new alarms and ALC (Automatic Level Control). It covers entire FM band from 87.5 to 108MHz without tuning and offers 15-50W of clean RF power.

The design of the MAX PRO 5000+ series is based on the now obsolete MAX PRO 4025+ exciter and also looks quite similar at first glance, however many improvements were implemented. The result is a rugged and solid FM exciter with completely flat power output across the entire FM band at 15W, 25W, 40W or 50V, designed to run silently and cool 24/7. Since the new design was so much better and completely stable under all conditions we were able to add 50W model.
The MAX PRO 5000+ are purposely over-engineered, using the very best components and materials that can be located. MAX PRO 5000+ are built the way you would build it for yourself if you had the time, knowledge, money, and inclination to do so. Why wait? Your dream FM exciter is a reality right now!

The exciter carries a one year limited warranty on parts and labor against defects in materials and workmanship, except the RF final transistor.

You can find the manual for this (and other products) here.

What parameters can I change via remote control?
Its best that you look at the screen capture below. The program may change over time as we make enhancements, we will be adding more features soon! Feel free to ask for any features you may want.

PC control software

Can I upgrade my old CyberMaxFM+ 15W transmitter with new exciter?
Sure, just exchange the boards, take the 3000+ out and replace it with 5015, 5025 or 5040. Don't forget to use stronger power supply!
However 5050 works from 24V and the board is bigger so replacement isn't possible for 50W model

Technical specifications:
- RF Output Power: 0 to 15 Watts, 0-25W, 0-40W and 0-50W (fully variable via LCD in nice gradual steps), LCD power adjustment range can also be limited to 0-1W, 0-2W, 0-3W, 0-4W ... 0-15W, 0-full, this is done with a jumper (exact options vary depending on model).
- Output connector: 15, 25 and 40W - BNC, 50W has solder posts (no connector on board)
- Output Impedance: 50 Ohms
- Frequency range: 87.5-108MHz
- PLL Steps: 5KHz-200KHz, adjustable
- Frequency stability: +/- 20Hz
- Spurious/Harmonic rejection: Harmonics: >50dB, Spurious: -90dB
- Power Supply 15W, 25W and 40W model: 11-15V/6A or car battery
- Power Supply 50W model: 24-32V/4A
- Power connector 15W, 25W and 40W model: 2.1mm power socket, center (+)
- Power connector 50W model: screw terminals (no soldering required)
- Quartz Locked PLL Frequency Control
- Ultra Stable, Ultra Clean Output
- No Expensive Test Equipment Required
- Audio performance: Less than 0.1% distortion, 20Hz-75KHz
- RF output ruggedness: SWR protection
- Polarity protection, temp protection
- Pre-emphasis, 50uS, 75uS or none
- Audio Input Impedance: 10Kohm, unbalanced
- Audio Input Level: 0 dB
- S/N ratio: >90 dB
- PC Board Size 15W, 25W and 40W model: 100x125mm
- PC Board Size 50W model: 120x125mm
- Audio connectors: RCA jack, optional MCX
- RF monitor: solder pads

Note:
50W model is slightly bigger than the board on the photo. It also does not have on-board connector (it needs to be soldered via coaxial cable) and runs off 24V and not 15V as the 15-40W models.

What is the Predrilled LCD front panel?
- This is a rectangular piece of aluminum with predrilled holes for LCD display, 3 buttons and LED diodes. It also has 4 holes in the corner so you can easily mount this to your case. This makes it much easier to mount the transmitter into a nice looking case (eliminates the hard work with the LCD). This is of course an optional item.

What is the Upgrade to new LCD display with rotary button?
- This is upgrade to our new LCD display type with rotary button in place where the three buttons used to be. It also has separate LED diodes for various alarms. The menu system is similar to regular display, but it does also offer an option to lock the display with a password!
This LCD module comes without the front panel shown on the photo only for ilustration!

What is that switch with LED diode?
MAXPRO50XX+ is delivered without ON/OFF switch, there is a jumper that can be removed and connected to the switch. This is the switch we use in our 19" racks, it also has a built-in LED diode for better effect. Instructions on wiring this switch are shown on the main board. This is of course an optional item.

What is the RS232 IO board and why do I need it?
IO board is required, if you want to control MAXPRO3000+ remotely via RS232. It plugs into the LCD control module. RS232 cable is not included.

What is the USB IO board and why do I need it?
IO board is required, if you want to control MAXPRO3000+ remotely via USB cable. The module plugs into the LCD control module. USB cable is not included (standard USB cable is available everywhere).

What is the Ethernet remote control module for?
This add-on card lets you connect this transmitter to the PC via Ethernet network. You can control and monitor the status of your transmitter over Ethernet or Internet. This is of course an optional item.

What is the Software+IOBOARD for changing logo?
This is a combination of special unlocked version of software and RS232 IO board, which is required to control MAXPRO5000+ remotely via PC/RS232. It plugs into the LCD control module. Software lets you change welcome text (logo); you can replace that text with your company name for example. Your customized text will be saved and used at every power-up. This is of course an optional item.

What is that tiny switch?
This is the switch we use in our 19" racks, it also has a built-in LED diode for better effect.

What is PCSLPF6000+ 1KW PTFE LPF with DIGIAMP?
This is a low pass filter with directional coupler (power and SWR meter) that simply connects to MAX PRO 3000+ via flat cable. Only used when you install this exciter in an enclosure together with amplifier. It can than be connected between the exit from amplifier and antenna connector to provide power, swr, temperature and voltage information to the FM exciter. Flat cable is ordered separately (DIGIAMP flat cable). You can read more about this in the manual.

What is PCSLPF7000+ 1.5KW PTFE LPF with DIGIAMP?
This is a low pass filter with directional coupler (power and SWR meter) that simply connects to MAX PRO 3000+ via flat cable. Only used when you install this exciter in an enclosure together with amplifier. It can than be connected between the exit from amplifier and antenna connector to provide power, swr, temperature and voltage information to the FM exciter. Flat cable is ordered separately (DIGIAMP flat cable). You can read more about this in the manual.

What else should I buy to construct a big 500W or 1000W or higher transmitter?
We really recommend these items to all users:
- LPF 6000 or 7000 series filter (described above), more info on these available here. 6000 and 7000 series filters are easier to connect (use digiamp flat cable).
- Any of these pallets here, a power supply for these can be purchased here
- Stereo encoder, any of these will do.
- A rack enclosure from 1H to 3H, with fans, accessories and more...
- Use teflon RG142 50 ohm coax for internal connections inside your rack (teflon coax is easier to work with, it does not melt when hot). Make sure all coaxial cable leads are very short.

What is the transmitter keylock?
You can use this keylock to disable the LCD control unit keys. In some countries regulations demand that the controls be disabled. This is the easiest way to do it professionally. The keylock connects to the jumper on the LCD module. This is of course an optional item.

To look for a suitable antenna check: here.
To look for a suitable coaxial cable check: here.
To look for a suitable stereo encoder check: here.
To look for a suitable case check: here.


Este produto foi adicionado ao seu catálogo em Sunday 13 February, 2011.
 *Por favor seleccione a quantidade que pretende para cada item e clique no 'Add To Cart' botão em baixo.
Mostrando 1 a 18 (de 18 produtos) Páginas de Resultados:  1 
    Nome   Modelo   Escolha   Preço 
MAXPRO5015+ v4 15W FM exciter with LCD module  MAXPRO5015+ v4 15W FM exciter with LCD module     182.99EUR
MAXPRO 5025+ v2 25W FM exciter with LCD module  MAXPRO 5025+ v2 25W FM exciter with LCD module     232.98EUR
MAXPRO5050+ 50W 24V FM exciter with LCD module  MAXPRO5050+ 50W 24V FM exciter with LCD module     209.99EUR  189.99EUR
Upgrade LCD to new type with rotary button  Upgrade LCD to new type with rotary button     10.00EUR
Predrilled LCD front panel  Predrilled LCD front panel     4.99EUR
Software+IOBOARD for changing logo  Software+IOBOARD for changing logo     39.99EUR
USB IO board+  USB IO board+     29.99EUR
RS232 IO board+  RS232 IO board+     19.99EUR
RS232 cable for IO board  RS232 cable for IO board     10.99EUR
Ethernet remote control module  Ethernet remote control module     89.99EUR
PCSLPF6000+ 1KW PTFE LPF with DIGIAMP  PCSLPF6000+ 1KW PTFE LPF with DIGIAMP     89.99EUR
PCSLPF7000+ 1.5KW PTFE LPF with DIGIAMP  PCSLPF7000+ 1.5KW PTFE LPF with DIGIAMP     99.99EUR
14-pin DIGIAMP flat cable (40cm, 2 connectors)  14-pin DIGIAMP flat cable (40cm, 2 connectors)     5.99EUR
Replacement LDMOS for MP5015+  Replacement LDMOS for MP5015+     19.99EUR
Replacement LDMOS for MP5025+  Replacement LDMOS for MP5025+     24.99EUR
Replacement LDMOS for MP5040+  Replacement LDMOS for MP5040+     24.99EUR
Switch with LED diode  Switch with LED diode     2.99EUR
Transmitter keylock (optional)  Transmitter keylock (optional)     6.99EUR
Mostrando 1 a 18 (de 18 produtos) Páginas de Resultados:  1 
Carrinho de Compras
0 items
Pesquisa Rápida
 

Use palavras chave para encontrar o produto que procura.
Notificações

Sign up and receive special deals, discount codes, news and product updates delivered to your inbox. Emails are sent out ~ 1x/month.

Anúncios
Visita o nosso forum
ultimos comentarios:

clica para entrar no forum
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce
Moeda
   

Outras moedas

Contacte-nos | Sobre PCS Electronics | Sopporte | Questões frequentes | Como Começar | Entrega e devolução
Todos precios en US$ | Todos precios en EURO | Manuais, software e suporte

Todo o texto deste site, productos descrições, manuais e certeficados
Copyright © 2003-2014 by PCS Elektronik d.o.o.
Powered by osCommerce