6000W 3-way FM band PTFE splitter/combiner set

£6,09£1.045,41

In Stock
SKU: No resdistors Category:
£1.045,41

In stock

£522,70

In stock

£87,11

In stock

£522,70

In stock

£574,97

In stock

£6,53

In stock

£6,09

In stock

£7,83

In stock

Prices shown are without VAT (paid only in EU)

Description

6KW (6000W) 3-way pallet amplifier combiner

Make your own 6000W amplifier or transmitter with these heavy-duty 3-way combiners. Assembled and tested, ready to be installed. Heavy duty design, large and sturdy. You will need one input board, one output board and 3 identical amplifier modules of any rating from 0 to 2000W. Output combiner must be bolted to a heatsink with some airflow for cooling, input combiner can be bolted directly to an aluminum enclosure as it does not heat-up much. Surface mount construction makes installation easy.

Technical specifications output combiner:
– 86 – 110MHz
– Impedance: 50 ohms
– Max power per module: 2000W
– Max combined output power: 6000W
– Ultra low loss PTFE PCB; tightly controlled dielectric constant.
– Specifically designed for combining several RF amplifiers.
–  0.1 dB maximum power loss.
– PCB measures: 371 mm x 126.5 mm x 18 mm tall (when matching inductors are installed.)
Complete with 1/4 inch aluminum spreader plate, 50 ohm 800W resistors, matching inductors and tuning.
– PCB is Teflon 0.125 inch thick with ceramic filler; 2oz copper. Tightly controlled dielectric constant.
– Input return loss better than -25dB 87.5 to 108.1MHz (when  matching inductors are used)
– Output return loss better than -23dB 87.5 to 108.1MHz.

 

Technical specifications input combiner:
– 86 – 110MHz
– Impedance: 50 ohms
– Max power per module: ~15W
– Max combined input power: ~40W
– Specifically designed for combining several RF amplifiers.
– Size: 226.3 mm x 64.8 mm x 3.2 mm
– Common port return loss: better than -20dB
– Outputs return loss: better than -25dB
– Unbalance: 1 degree max

Note: Use PTFE coax/semi-rigid to make connections, suitable cables are here.  0.250 inch semi-flexible hand-bendable 50ohm cable is a good fit.

Important: Keep leads very short, every millimeter counts! Any wiring from pallets to combiners must be symmetric (equal-length coaxial cable).

 

Additional information

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.