Description
This is a professional UPS for commercial applications. This true double-conversion 3U (6KVA) or 5U (10KVA) Online UPS comes with a robust design as well as a high efficiency and reliability. The VFI PRT HID units must be hard-wired, but they feature a power distribution module with several outlets.
The device is secured with a physical maintenance bypass switch and a REPO connector. They can operate in parallel for power extension or redundancy. This way one UPS is backing up the other one in case of a failure, resulting in the highest security level.
GENERAL FEATURES | |
Type | Online Single Phase (VFI) |
Phases (IN-OUT) | 1-1 |
Form Factor | Rack, Tower |
Rack Units [U] | 3U |
Power Capacity | 6000VA / 5400W |
Output Power Factor | 0.90 |
INPUT | |
Input Voltage Range | 120-276 VAC Depends on Load Level |
Max THDi | ≤5% |
Frequency Range | 45Hz – 55Hz or 54Hz – 66Hz |
Frequency (Synchronized Range) | 45Hz – 55Hz or 54Hz – 66Hz |
OUTPUT | |
Waveform | Pure Sine Wave |
Nominal Output Voltage | 208/220/230/240 VAC |
THDv | ≤2% @ 100% linear load, ≤5% @ 100% non-linear load |
Voltage Regulation (Battery Mode) | ±1% |
Frequency (Battery Mode) | ±0.1Hz |
INPUT & OUTPUT CONNECTORS | |
Input Connector | Terminal |
Output Type | Terminal |
IEC C13 | 4 |
IEC C19 | 2 |
Terminal Output | Yes |
TECHNICAL DETAILS | |
LINE Mode Efficiency [%] (Full Load) | 93.3 |
Battery Mode Efficiency [%] (Full Load) | 89.0 |
Transfer Time (AC / Line Mode or Battery Mode to ECO Mode) [ms] | 1ms |
Transfer Time (AC / Line Mode to Battery Mode) [ms] | 0ms |
Transfer Time (ECO Mode to AC / Line Mode or Battery Mode) [ms] | 10ms |
Transfer Time (Line Mode or Battery Mode to Bypass Mode) [ms] | 0ms |
Load Crest Ratio | 3:1 |
Bypass | Manual – Bypass |
Additional Features | Earthing System Available, ECO Mode Available, CVCF Mode Available, Potential Equalization Screw, Hot-Swappable Batteries, OBM – Optimized Battery Management, Parallel Connectivity, REPO – Remote Emergent Power-Off, Fixed Dry Contacts Included (RS-232), Dual Input Option, LCD Display, Battery Pack Available, Generator Compatible, HID – Human Interface Device, AVR – Automatic Voltage Regulator |
IEC 62040-3 classification | VFI-SS-111 |
BATTERIES AND AUTONOMY | |
Batteries | 15x 12.0V/5.0Ah |
DC Voltage | 15x 12.0V |
Recharge Time | 3h to 90% |
Full Load Backup Time [min] | 3.4 |
Half Load Backup Time [min] | 9.8 |
Charger | 1A |
External Battery Pack | Yes |
COMMUNICATION | |
Communication | USB Type B – for Monitoring Software, RS-232, Management Card Slot |
Software | WinPower |
Parallel Operation [Units] | 2 |
ENVIRONMENT | |
Noise Level | < 45dB |
Fan Logic | Always on, Automatic Speed Control |
Temperature | 0°C – 40°C |
Humidity | 0% – 95% RH (non-condensing) |
IP | IP 20 |
Reviews
There are no reviews yet.