PCS Electronics, radio and TV transmitter superstore! Chat with our engineers or leave a message English Espanol Portugues Norwegian    
  Topo » Catálogo » RF accesories for transmitters » RF combiners/splitters (FM&TV) » Minha Conta  |  Conteudo do cesto  |  Verificação Final   
Categorias
FM transmitters->
AM transmitters
Special sale items
RF accesories for transmitters->
  Dummy loads
  Fans and blowers
  Mains power supply
  RF attenuators
  RF filters for transmitters
  RF output boards
  RF parts and connectors
  SWR and POWER meters
  Amplifier Control Boards
  RF combiners/splitters (FM&TV)
  Die cast enclosures
  Rack cabinets and boxes
  FM signal analyzers
  RF power resistors
FM amplifiers->
FM radio antennas
TV Transmitters->
PC Transmitters
TV amplifiers->
TV antennas
Coaxial cable and connectors
RDS Encoders
Stereo encoders
Wireless audio/video links
Instruments
Electronic components->
Software
Cool Stuff->
Solar power
Studio equipment->
DEVA Broadcasting->
RF service and design
O que há de novo?
IO board (USB+RS232+3xBNC) with 2x 20cm 6-pin flat cable
IO board (USB+RS232+3xBNC) with 2x 20cm 6-pin flat cable
39.99EUR
Nossos Manuais de rádio
Como Começar
Questões Frequentes
Making Your Own Transmitter
Cabo Coaxial
Equipamento de Audio
Esquemas
Novos esquemas
Wizards
Amplificadores
Antenas
Power Supply
Recomendado Lêr
Soldar
Comentarios
Informação
Sobre PCS Electronics
Entrega e devolução
Requisitar
Sopporte
Actual Stock
Questões frequentes
Forum
Contacte-nos
Distribuidores
Nota de Privacidade
Affiliate Program
Affiliate Information
Affiliate Program FAQ
Affiliate Log In
Vouchers
Cheques prenda FAQ
Seguran‡a


PayPal and credit cards accepted!
1000W FM band teflon splitter/combiner set  


Ideal for splitting and combining up to 1KW FM signals

Designed for FM radio transmitters, these Teflon splitter combiner assemblies are ideal for splitting and combining FM signals in the 88-108MHz frequency range.
Splitter combiners are useful for combining RF amplifiers to obtain high power levels. They are also used on multi-bay antenna setups.
This combiner will handle up to 1000 watts because of its extremely low loss characteristics and Teflon construction.
These combiners should not be used to combine 2 600 or 700W Pallets. Use 2000W combiner for that unit!
These combiners and flange mount 100 ohm resistor must be secured to a heat sink to insure a good ground and to keep the pcb cool. The back side of the pcb can be coated with a very thin layer of heat sink compound. All mounting holes should be used.
The resistors are not attached to the PCB. We leave this job to the end user.
An AutoCad/DXF file showing the mounting hole locations is available upon request.

The table below summarizes the typical performance of our splitter/combiners. You will find that our combiners offer state of the art performance at a low price. Who else sells a high power combiner on a Teflon/ceramic substrate?


Frequency Input Return Loss Output Return Loss Power Loss
88MHz -34.46dB -22.44dB 0.108dB
98MHz -34.99dB -27.14dB 0.092dB
108MHz -39.33dB -23.92dB 0.113dB


Technical specifications:
- Specifically designed for combining 2 RF amplifiers or driving 2 antennas.
- 1000 watt power rating.
- 0.12dB maximum power loss.
- PCB measures 4.94 inches x 3.18 inches.
- 250 watt 100 ohm power balancing resistor.
- PCB is Teflon with ceramic filler; 2oz copper. Tightly controlled dielectric constant.
- Non-reactive; this means you can use 3 boards to create a 4 way combiner!
- Guaranteed not to burn under high SWR conditions.
- Shipping weight: 0.1Kg


The splitter combiner set includes 2 Teflon Combiner PCB's and 2 resistors as listed below.
(1) The axial leaded resistor 100 ohms 5 watts is ideal for low power situations like at the input of a pair of pallet amplifiers.
(2) The 250 watt 100 ohm flanged resistor is intended for use at high power.

Este produto foi adicionado ao seu catálogo em Thursday 01 November, 2007.
 *Por favor seleccione a quantidade que pretende para cada item e clique no 'Add To Cart' botão em baixo.
Mostrando 1 a 3 (de 3 produtos) Páginas de Resultados:  1 
    Nome   Modelo   Escolha   Preço 
1000W Teflon splitter/combiner set  1000W Teflon splitter/combiner set     79.99EUR
Spare 100ohm 250W resistor (for 1000W)  Spare 100ohm 250W resistor (for 1000W)     14.99EUR
Spare 5W 100ohm resistor (for 20W input max)  Spare 5W 100ohm resistor (for 20W input max)     2.99EUR
Mostrando 1 a 3 (de 3 produtos) Páginas de Resultados:  1 
Carrinho de Compras
0 items
Pesquisa Rápida
 

Use palavras chave para encontrar o produto que procura.
Notificações

Sign up and receive special deals, discount codes, news and product updates delivered to your inbox. Emails are sent out ~ 1x/month.

Anúncios
Visita o nosso forum
ultimos comentarios:

clica para entrar no forum
Google™ translate
English French Spanish
German Italian Portuguese
Korean Japanese Arabic Greek Turkce
Moeda
   

Outras moedas

Contacte-nos | Sobre PCS Electronics | Sopporte | Questões frequentes | Como Começar | Entrega e devolução
Todos precios en US$ | Todos precios en EURO | Manuais, software e suporte

Todo o texto deste site, productos descrições, manuais e certeficados
Copyright © by PCS Elektronik d.o.o.
Powered by osCommerce